What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
To start a YouTube stream from OBS, create or schedule the broadcast in YouTube Studio’s Live Control Room, copy its server URL and stream key into OBS, then start the encoder. For a scheduled broadcast, check the preview and click Go live in Live Control Room unless Auto-start is enabled. A 24/7 setup needs more than a launch sequence: YouTube warns that streams longer than 12 hours may not be captured as replays, so record locally if the archive matters. The cited YouTube guidance does not promise that one broadcast will stay live indefinitely.
Before you start: check channel eligibility
YouTube says a channel must be verified and have had no live-streaming restrictions in the previous 90 days to stream live. Its stated minimum age for live streaming is 16. Confirm that live streaming is enabled on the channel before configuring OBS; otherwise the encoder can be ready while the channel is not eligible. See YouTube’s live-streaming eligibility guidance.
Create or schedule the broadcast in Live Control Room
In YouTube Studio, select Create → Go live to open Live Control Room. Choose the workflow that fits your launch:
| Workflow | When to use it | What to expect |
|---|---|---|
| Stream now | You are setting up a broadcast to begin without advance scheduling. | Configure the stream in the Stream workflow and connect OBS. |
| Schedule stream | You want to promote the broadcast in advance. | Use Manage → Schedule stream. Scheduling provides a shareable watch URL and lets viewers set reminders. For the scheduled event, send the feed from OBS, check the preview, then select Go live. |
Set an accurate title, description, visibility, and other event details. Select or create the stream settings and key. If you are preparing a recurring continuous channel, verify the selected event and settings before launch rather than assuming that a previous event’s configuration applies.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
See YouTube’s guide to creating a live stream and its scheduling guidance.
Connect OBS to YouTube
- Get the connection details. In Live Control Room, open the stream settings and copy the server URL and stream key.
- Enter them in OBS. In OBS, open Settings → Stream, choose the YouTube service or preset if available, and enter the key. If you configure the connection manually, put the URL from Live Control Room in the server field and the key in the stream-key field.
- Prefer RTMPS. YouTube recommends RTMPS, the encrypted form of RTMP. If entering the server address manually, use the RTMPS URL shown in Live Control Room rather than assuming that an RTMP address is encrypted. See YouTube’s encoder connection guidance.
Treat the stream key like a password: do not show it in a screenshot, recording, or public tutorial. If it is exposed, a channel owner or manager can reset it in Live Control Room; update OBS with the replacement key before sending the feed again.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Set OBS output to match YouTube’s guidance and your connection
YouTube’s recommended encoder settings vary by codec, resolution, and frame rate. Its guidance covers RTMP/RTMPS and H.264, H.265 (HEVC), and AV1 video, with frame rates up to 60 fps. Use the current YouTube encoder settings table for your exact combination instead of applying one bitrate to every stream.
H.264 examples from YouTube’s recommendations
| Output | Minimum bitrate | Recommended bitrate |
|---|---|---|
| 1080p at 30 fps, H.264 | 5 Mbps | 14 Mbps |
| 1080p at 60 fps, H.264 | 6 Mbps | 17 Mbps |
These are YouTube Help recommendations, not guaranteed bandwidth requirements. Leave headroom for network variation and test your actual upload capacity. YouTube recommends constant bitrate (CBR) encoding and a two-second keyframe interval; the interval should not exceed four seconds. Match the output to the motion and detail in your content: fast-moving gameplay can make compression limits more noticeable than a static scene.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Before relying on the stream, run a test with representative audio and motion and check the Live Control Room preview and stream health. See YouTube’s current encoder recommendations for settings beyond the H.264 examples above.
Start the broadcast and verify it is live
- In OBS, start streaming so YouTube begins receiving the encoder feed.
- For a scheduled event, wait for the Live Control Room preview to appear. Check the picture and audio, then click Go live.
- For a stream being set up now, follow the controls and status shown in Live Control Room; confirm that the event is live rather than assuming that an active OBS encoder means the public broadcast has started.
- When ending the event, use End Stream in Live Control Room and stop sending content from OBS, following the current event controls.
Check the event’s Auto-start and Auto-stop settings before relying on an unattended start or stop. Those settings can change whether starting or stopping the encoder also starts or ends the YouTube broadcast. YouTube’s event-preparation tips recommend setting up an encoder at least two hours before an event and starting it at least 15 minutes before the scheduled start; these are preparation recommendations, not a 24/7 uptime guarantee. See YouTube’s live-stream preparation tips.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Plan separately for the live feed and its replay
YouTube Help warns: “If your stream exceeds 12 hours, it may not be captured at all.” Streams under 12 hours can be automatically archived, but the warning means an over-12-hour replay is not assured. It is an archive caveat—not documentation that every 12-hour stream will stop, nor a stated maximum duration for a live broadcast. YouTube does not promise in the cited guidance that one stream will remain live indefinitely or that a 24/7 broadcast will be divided into reliable replay segments.
If a replay matters, make a local recording and plan where it will be stored. YouTube recommends keeping a local archive as backup; it does not specify a required device or capacity. Allow enough storage for the recording duration and quality you choose, and check that OBS is actually recording before leaving a long broadcast unattended. See YouTube’s archive guidance.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Keep a long-running OBS stream operational
A continuous broadcast depends on the computer, encoder, network connection, and YouTube ingest continuing to work. YouTube’s cited setup guidance supports testing and monitoring, but does not provide a complete 24/7 failover procedure. Plan how you will notice an interruption and how you will restart the encoder and confirm the broadcast is live again; an active OBS window alone is not proof that viewers can see the stream.
- Test the intended resolution, frame rate, audio, and representative content before launch.
- Check Live Control Room’s preview and stream-health indicators at launch and during operation.
- Keep the stream key private and have an owner or manager reset it if it is compromised.
- Record locally if you need a dependable copy of the program, then check that the recording is being written and that the destination has room.
- Decide how you will respond to a dropped connection, encoder failure, or YouTube interruption; do not assume that a single event or replay will recover itself.
Troubleshooting common launch problems
| Symptom | Likely check | What to do |
|---|---|---|
| You cannot start a live broadcast. | Channel verification, recent live-stream restrictions, or age eligibility. | Confirm the channel meets YouTube’s eligibility requirements before troubleshooting OBS. |
| YouTube does not receive the OBS feed. | Server URL, stream key, or selected service in OBS. | Copy the current URL and key from Live Control Room. If the key was reset or exposed, replace it in OBS. |
| The scheduled event is not publicly live. | Encoder feed may be present, but the event may still need the preview check and manual Go live action. | Check the preview and event status in Live Control Room, and review Auto-start settings. |
| Video quality or stream health is unstable. | Bitrate may be too high for available upload capacity, or output settings may not match the current YouTube recommendation. | Test upload capacity, use the current table for the selected codec and output, leave network headroom, and inspect stream health. |
| The replay is missing after a very long broadcast. | Streams exceeding 12 hours may not be captured as archives. | Use a local recording as backup; the replay warning does not establish that the live event itself was stopped. |
Or let it run in the cloud
If your goal is to keep prerecorded programming on YouTube rather than broadcast a live camera or game session from OBS, StreamNeo is a cloud service that loops uploaded videos or playlists. The setup is upload a recording or build a playlist, add your YouTube stream key, and go live. Your computer and home connection do not have to stay on. Each slot streams the uploaded quality up to 4K 60fps at one flat price, with no re-encode or quality tiers, and includes automatic recovery if YouTube drops the stream. The first day is free with no card. Monthly pricing is $9.99 per month. See StreamNeo plans for billing options and included storage. It streams to YouTube only and is for uploaded videos, not a live camera feed.
Quick Recap
Start your free StreamNeo day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
