Add the logo as an OBS Image source in the scene that already plays your loop, then place that source above the video in the Sources list. The logo’s size and position are scene-composition choices; 4K at 60 fps is controlled separately by your OBS output and YouTube encoder settings. Test the result in YouTube’s Live Control Room before making it public.
Add the logo to your loop scene
- Open the scene that carries your loop. Use the OBS scene where the video is already playing; this keeps the logo attached to the same broadcast scene.
- Add an Image source. In the Sources list, add an Image source and choose your logo file. OBS documents image sources in its Knowledge Base search results.
- Layer it above the loop. Move the logo source above the video source in the Sources list. Sources higher in the list appear over sources below them.
- Set its size and position in the preview. Resize and move the logo so it remains within the picture area and does not cover important text or focal details. Leaving room from the screen edges is a composition choice, not a YouTube requirement.
- Keep it separate from the video. A separate source lets you move, resize, hide, or replace the logo without editing the loop file. Exact control names and interactions can vary by OBS version, so check your installed version if a label differs.
The overlay is applied in the OBS scene while the loop plays; it does not need to be baked into the underlying video. YouTube describes encoder streams as supporting overlays, and notes that encoders let creators stream gameplay and overlays (YouTube live streaming tips).
Set up OBS and YouTube for 4K at 60 fps
Adding a logo does not set your broadcast resolution, frame rate, or bitrate. Confirm that your OBS canvas and output are configured for 3840×2160 at 60 fps, and that your computer and network can sustain the settings. YouTube’s encoder settings and bitrate recommendations can change, so recheck its current guidance when configuring a future stream (YouTube encoder settings).
Choose the bitrate for the codec you are using
YouTube’s published guidance, accessed October 3, 2026, gives these recommendations for 2160p at 60 fps:
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstall#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
| Codec | Recommended bitrate | Minimum bitrate |
|---|---|---|
| AV1 or H.265 (HEVC) | 35 Mbps | 10 Mbps |
| H.264 | 50 Mbps | 14 Mbps |
Use the figure for the codec your encoder actually sends; these recommendations are not interchangeable. YouTube recommends CBR bitrate encoding and a 2-second keyframe frequency, with a maximum keyframe interval of 4 seconds. It recommends RTMPS for the connection. For 4K/2160p, YouTube’s low-latency option is unavailable and streams use normal latency. See YouTube’s encoder settings guidance for current values and details.
Check the stream key and resolution behavior
YouTube detects encoder settings automatically by default. Its guidance says a custom stream key allows manual resolution settings. Use the key and configuration appropriate for your stream in OBS, and keep the key private: anyone who obtains it may be able to send video to your channel. YouTube transcodes live streams into multiple output formats for viewers; your outgoing OBS settings still determine what you send to YouTube.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Preview and test before going public
- Open YouTube Live Control Room and check the incoming preview for the logo’s position, scale, and visibility over representative parts of the loop.
- Test with representative motion and audio rather than checking only a still frame. Confirm that the video remains smooth and the audio is correct.
- Monitor YouTube’s stream-health information during the test. Resolve warnings or visible quality problems before starting a public broadcast.
YouTube recommends checking the stream preview and stream health when setting up an encoder broadcast (Create a YouTube live stream with an encoder).
Troubleshoot common logo and stream problems
| Symptom | What to check | Fix |
|---|---|---|
| The logo is hidden behind the loop | Its order in the Sources list | Move the Image source above the video source. |
| The logo is missing or appears incorrectly | The selected image file and its placement in the preview | Confirm the Image source uses the intended file, then reposition or resize it in the scene. |
| The stream is not 4K or 60 fps | OBS canvas/output settings, encoder configuration, and YouTube’s detected stream settings | Check that the output is 3840×2160 at 60 fps and review YouTube’s current encoder guidance. The overlay itself does not set resolution or frame rate. |
| YouTube reports poor stream health | Codec-specific bitrate, CBR, keyframe interval, and available upload capacity | Compare the encoder settings with YouTube’s current recommendations for the selected codec; lower output demands if the system or connection cannot sustain them. |
| The broadcast preview is absent or delayed | Stream key, connection method, and Live Control Room status | Verify the selected YouTube stream key and RTMPS configuration, then check the encoder setup guidance and wait for YouTube’s preview to populate before going public. |
Copyright and loop-content checks
An image overlay does not grant rights to the video, music, or other material in the loop. Before streaming, confirm you have the rights or permissions needed for every element. YouTube’s encoder setup and live-stream guidance explains the platform workflow; review YouTube’s applicable copyright and live-stream rules for your content rather than assuming that a loop or logo changes them.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Or let it run in the cloud
If the goal is to keep a prerecorded YouTube stream running continuously, StreamNeo is an alternative to leaving OBS and a computer running at home. Upload a recording or build a playlist, add your YouTube stream key once, and go live; StreamNeo loops the uploaded video from the cloud. It does not go live from a camera.
- Nothing has to stay on at home: the stream runs in the cloud.
- Every slot streams the uploaded video as made, up to 4K 60 fps, at one price per slot, with no re-encode or quality tiers.
- Automatic recovery is included if YouTube drops the stream.
- The first day is free with no card; one free day is available per account.
- Monthly: $9.99 per month.
See StreamNeo for service details, or start the free day.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
