Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Schedule the YouTube Live event in YouTube Studio, then connect OBS to that event with its stream URL and key. At the scheduled time, start OBS with your prerecorded Hindi podcast loaded and confirm the preview and stream health in YouTube’s Live Control Room. Scheduling creates an upcoming event page; it does not, by itself, start OBS or trigger playback of a local recording.
Before you schedule the rerun
- Your channel must be verified and must not have had live-streaming restrictions in the preceding 90 days. YouTube limits live streaming to people aged 16 or older. Check current eligibility in YouTube’s encoder-stream instructions.
- Have the finished podcast recording available on the computer running OBS, and make sure you can monitor its audio. A stable connection matters: a Hindi podcast can remain understandable at modest video resolution, but interruptions or incorrectly routed audio can make the rerun unusable.
- Choose an event time that gives you time to test the recording and encoder beforehand. YouTube recommends setting up an encoder stream in advance and starting the encoder at least 15 minutes before the event; this does not mean the public event must begin early.
Schedule the YouTube Live event
- Open YouTube Studio and select Create > Go Live > Manage > Schedule stream.
- Create a new stream or choose Reuse settings if you want to carry over settings from a previous event. Confirm the title, description, visibility, thumbnail, and scheduled start time for this episode.
- Save the scheduled stream. YouTube provides an upcoming watch page that you can share; viewers may choose Notify me. YouTube describes scheduling as a way to promote the stream, not as a command that starts your encoder or recording.
- In the event’s Live Control Room, find the stream URL and stream key for the scheduled event. Use the event’s details rather than assuming an old key or reused setup is the one OBS should send to.
For current scheduling and event-setting details, see Manage live stream settings and Create a YouTube live stream with an encoder.
Connect OBS and prepare the podcast recording
- In OBS, open Settings > Stream. Select YouTube as the service if available, or choose a custom streaming service and enter the event’s stream URL and stream key as appropriate to your OBS version and connection method.
- Treat the stream key as a password. YouTube says, “Stream keys are like your YouTube stream’s password and address.” Do not publish or share it. If you believe it has been exposed, an owner or manager can reset it in Live Control Room; replace the saved key in OBS before streaming again. See YouTube’s stream-key guidance.
- Load the prerecorded episode into the OBS playback setup you use, such as a media source or another established playback workflow. Confirm the source is visible if the episode includes video, and that its audio reaches the OBS audio mix. Play a section and listen on the monitoring output rather than relying only on the meters.
- Decide how playback should behave when the file ends. For a single rerun, avoid unintentionally looping the file unless you want the episode to repeat during the event. YouTube scheduling does not document a native trigger for starting a local OBS media file; any separate automation that starts playback needs its own testing.
Choose stable encoder settings
For a podcast rerun, pick a supported resolution and frame rate that your computer and upload connection can sustain. Do not choose a bitrate without accounting for the target resolution, frame rate, codec, and available upload bandwidth. YouTube’s current tables list supported combinations and recommended bitrates; check the table for the format you actually select in Choose live encoder settings, bitrates, and resolutions.
- Protocol: YouTube recommends RTMPS for encrypted ingest.
- Video format for RTMP/RTMPS: H.264.
- Audio: AAC or MP3.
- Rate control: constant bitrate encoding.
- Keyframes: use a 2-second interval; YouTube says not to exceed 4 seconds.
- Upload capacity: YouTube recommends leaving 20% headroom above the stream’s bitrate. Measure the connection you will use for the event rather than relying on its advertised maximum.
These are platform recommendations, not a guarantee that a particular computer or connection will hold a stream. Test the same recording path and similar audio and motion before the scheduled broadcast.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteSpecial offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Elebase USB to USB C Adapter for iPhone 18 Pro Max,USBC Car Charger Adapter
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Test, start, and monitor the scheduled stream
- Before the event, start OBS and check that the recording plays, audio is audible and correctly routed, and the encoder reports a connection. Start the encoder early enough to address setup problems; YouTube recommends at least 15 minutes before the event for encoder streams.
- Open the scheduled event in Live Control Room and wait for the preview. Confirm the picture and listen for clean, continuous audio before going live.
- At the intended time, use the Live Control Room’s go-live controls if the event requires confirmation, and verify that the public watch page is showing the stream. The OBS encoder and the scheduled event are separate parts of the workflow.
- Keep OBS, the recording source, and the network connection running while the episode is playing. Monitor YouTube’s stream-health messages as well as the audio and video in OBS.
- When the episode is finished, end the stream from the appropriate controls and check the archive. YouTube says streams shorter than 12 hours are automatically archived.
YouTube’s preflight and bandwidth advice is collected in Streaming tips.
Troubleshoot common rerun problems
| Symptom | Likely cause | What to check or do |
|---|---|---|
| The scheduled page exists, but no podcast starts | Scheduling creates the event page; it does not establish that OBS or local playback will start automatically. | Start OBS and the media source yourself at the planned time, or test any separate playback automation before relying on it. |
| Live Control Room shows no preview | OBS may not be sending, or the event URL/key may be wrong. | Check that OBS is streaming, then verify its stream URL and key against the scheduled event. Reset an exposed key and update OBS. |
| Video is present but the podcast is silent | The media source audio may not be routed into the OBS mix, or the wrong monitoring/output path may be selected. | Play a sample before the event, watch the audio meters, and listen through the monitoring output. Verify the source and output routing. |
| Stream health reports instability or the stream drops | The upload connection may not sustain the chosen bitrate, or the computer/network may be interrupted. | Check stream health, reduce the selected video settings to a supported bitrate that fits the measured connection, and preserve YouTube’s recommended 20% bandwidth headroom. |
| The episode repeats or ends earlier than intended | The playback source may be set to loop, or the source may have stopped at the end of the file. | Test the full playback behavior beforehand and set looping deliberately for the event’s intended duration. |
Copyright and the integrity of a rerun
Only stream a recording and its included music, clips, and other material when you have the necessary rights or permissions. Scheduling and encoder settings do not grant those rights. Review YouTube’s applicable policies for the content and channel before making a rerun public; this workflow does not guarantee that a recording will avoid a copyright claim or other platform action.
Rank #2
Anker USB-C Hub, 5-in-1 USB Hub for Laptops, 4K HDMI Multiport Adapter
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Or let it run in the cloud
If the goal is to keep a prerecorded YouTube stream running without leaving a home computer online, StreamNeo is a cloud option: upload the recording or build a playlist, add your YouTube stream key once, and go live. Nothing has to stay on at home; uploaded video streams as made, up to 4K 60fps, at one price per slot; automatic recovery is provided if YouTube drops the stream. The first day is free with no card. Monthly pricing is $9.99 per month. It is for uploaded-video playback to YouTube, not live camera streaming. Start the free day with StreamNeo.
Quick Recap
Bestseller No. 5
Best Value
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
Sale
UGREEN USB to USB C Adapter Combo 4-Pack, 10Gbps USB C Converter Space Gray
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
