Recommended Free Tools
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
To loop a Malayalam pre-recorded video on YouTube Live at 720p, use OBS Studio: add the file as a Media Source, enable Loop, set the output resolution to 1280×720, then connect OBS to a YouTube Studio encoder stream with its stream URL and key. For H.264, YouTube’s current recommendation is 8 Mbps at 720p; use CBR and a 2-second keyframe interval. The file repeats in OBS—not through a YouTube bitrate setting.
Set up a looping video in OBS
- Create a scene and add the video. In OBS, select or create a scene, then use Sources → + → Media Source. Choose the Malayalam video file and enable Loop in the source properties. This repeats one file when playback reaches its end. OBS’s Media Sources documentation, dated 2022-01-11, describes this control: OBS Media Sources.
- For multiple videos, use a playlist source. Add a VLC Video source, add the files to its playlist and enable Loop Playlist. VLC must be installed for this source to work. See OBS Media Sources.
- Set the canvas and output. In OBS, open Settings → Video and set Output (Scaled) Resolution to 1280×720. Choose a Common FPS Value that matches the source when practical. For typical 720p material, 30 fps is a sensible starting point; use 60 fps only when the source’s motion benefits from it and your computer can sustain the extra load. OBS notes that 60 fps can be more demanding. OBS standard setup guides.
- Configure streaming output. Open Settings → Output → Streaming. Select H.264, set Rate Control to CBR and Keyframe Interval to 2 seconds. YouTube accepts H.264, H.265 and AV1 over RTMP/RTMPS and says the keyframe interval should not exceed 4 seconds. For ordinary stereo audio, use AAC or MP3 at 128 Kbps and 44.1 kHz stereo. These are YouTube Help recommendations; the settings page does not display a publication year. YouTube encoder settings.
Choose the bitrate for 720p
YouTube’s bitrate table lists the following recommendations. These figures are YouTube guidance, not results of a named study, and the page does not state a publication year.
| Output and codec | Minimum video bitrate | Recommended video bitrate |
|---|---|---|
| 720p30, H.264 | 3 Mbps | 8 Mbps |
| 720p60, H.264 | 3 Mbps | 8 Mbps |
| 720p30 or 720p60, AV1 or H.265 | 2 Mbps | 6 Mbps |
For a first setup, H.264 is a broadly supported encoder choice. Choose a bitrate your measured upload connection can sustain, and leave capacity for other network traffic. YouTube recommends 20% upload-bandwidth headroom. The video bitrate is not the total upload requirement: audio and network overhead also use bandwidth. Check YouTube’s current encoder settings and bitrate recommendations when configuring your stream.
Connect OBS to YouTube Studio
- In YouTube Studio, open the Live Control Room and create or schedule an encoder stream. You may need to enable live streaming for the channel before the first broadcast.
- Copy the stream URL and stream key from the stream settings into OBS under Settings → Stream. Select RTMPS if it is available in your setup; YouTube recommends the encrypted protocol. The URL is the ingest destination, while the key associates your encoder with the YouTube stream. YouTube describes stream keys as “like your YouTube stream’s password and address.” Treat the key like a password: do not publish or share it. See YouTube Live encoder setup and YouTube stream keys.
- YouTube defaults to automatically detecting encoder resolution and frame rate. Keep that setting unless you specifically need a fixed ingest format; manual resolution selection is available with a custom stream key and manual settings. YouTube encoder settings.
- Start streaming in OBS and confirm the feed appears in the Live Control Room preview. Start the YouTube broadcast when the preview and stream health are ready.
Test the loop and protect stream quality
Before relying on a long broadcast, run a private or unlisted test. Confirm the video plays, audio is audible, and the transition from the end back to the beginning works as intended. Watch the Live Control Room’s stream health and messages, and test with similar motion and audio to the material you intend to broadcast.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Elebase USB to USB C Adapter for iPhone 18 Pro Max,USBC Car Charger Adapter
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Measure upload bandwidth under the conditions in which the stream will run, then preserve YouTube’s recommended 20% headroom.
- For a scheduled event, YouTube’s streaming tips say to set up the encoder at least two hours beforehand and start it at least 15 minutes before the event. YouTube live streaming tips.
- Use normal or low latency if viewers do not need to interact in real time. Lower latency can increase buffering. DVR lets viewers pause and rewind; choose it based on the viewing experience you want. YouTube live streaming tips.
Check rights and YouTube policy before broadcasting
Technical setup does not establish permission to rebroadcast a particular video. Confirm that you have the necessary rights for the exact Malayalam recording and every included element—such as music, lyrics, translations, artwork and other audio or visual material. Also ensure the channel and stream comply with YouTube’s applicable copyright and live-streaming policies. A language or devotional purpose does not itself clear copyrighted material.
Troubleshooting common problems
| Symptom | Likely cause | What to check |
|---|---|---|
| The video ends and does not restart | Loop is off on the Media Source, or a playlist is not set to repeat. | Open the source properties and enable Loop for one file, or Loop Playlist for a VLC Video source. |
| OBS cannot play the playlist | VLC is not installed, or the playlist files are unavailable. | Install VLC and verify each file path in the playlist. |
| YouTube does not receive the stream | Wrong stream URL or key, stream key mismatch, or incorrect encoder connection settings. | Copy the URL and key for the intended Live Control Room stream again. Keep the key private. |
| Stream health reports instability or viewers see buffering | The upload connection may not sustain the selected bitrate, especially with other traffic. | Check measured upload bandwidth, lower the bitrate if needed, and preserve 20% headroom. |
| Output looks soft, cropped or unlike the source | Output resolution or frame-rate choices do not suit the source or scene. | Confirm Output (Scaled) Resolution is 1280×720 and choose a frame rate that matches the material. Check the preview before going live. |
| Audio is missing or distorted | Source audio or OBS audio output may be misconfigured. | Check the Media Source audio and OBS mixer meters, then verify the selected audio codec, bitrate and sample rate against YouTube’s guidance. |
Or let it run in the cloud
OBS is the do-it-yourself option, but the computer running it and its internet connection have to remain available. StreamNeo is a cloud service for keeping a YouTube channel live from uploaded videos: upload the recording or build a playlist, add your YouTube stream key, and go live. Nothing has to stay on at home; it streams the uploaded file as made, up to 4K 60fps, at one price per slot, and can automatically recover if YouTube drops the stream. The first day is free with no card. Monthly pricing is $9.99 per month. StreamNeo is for YouTube and uploaded videos, not camera broadcasting. Start your free day with StreamNeo.
Quick Recap
Bestseller No. 5
Best Value
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
Sale
UGREEN USB to USB C Adapter Combo 4-Pack, 10Gbps USB C Converter Space Gray
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Rank #2
Anker USB-C Hub, 5-in-1 USB Hub for Laptops, 4K HDMI Multiport Adapter
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
