Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
To include several prerecorded videos in a Streamlabs Desktop YouTube broadcast, either add each clip as a separate source or scene and switch between them yourself, or use a playlist-capable source to play clips in sequence if your installed version offers one. Streamlabs’ current public setup guide explains scenes and sources, but does not establish a universal multi-file playlist workflow or identical controls across versions. Build the setup, check it in preview, and test playback and audio before going live.
Choose how the clips should play
| Method | Best for | What to check |
|---|---|---|
| Separate media sources or scenes, switched manually | Choosing when each clip plays, or controlling the order and transitions yourself. | Each source’s visibility, position, audio, and playback behavior in your installed version. |
| Playlist-capable source | Playing several clips one after another without manually switching for every clip. | Whether your Streamlabs Desktop version exposes a suitable source and lets it access the playlist as intended. |
| Streamlabs Talk Studio prerecorded-video flow | Uploading a prerecorded video and scheduling a stream through Talk Studio. | This is a separate upload-and-schedule workflow, not evidence that Streamlabs Desktop queues local files. |
VLC documentation describes playing multiple media files successively from a playlist, but the available Streamlabs Desktop guidance does not confirm the integration, source name, or controls in every Desktop release. Treat the playlist route as version-dependent, not a guaranteed feature.
Add clips as separate sources or scenes
- Open or create the scene. In Streamlabs Desktop, select the scene intended for the prerecorded segment, or create one for it. Streamlabs’ getting-started guide describes the general scene-and-source setup; exact labels can vary by version.
- Add a local video source. In the Sources panel, use its add control and choose the available media or video source for a local file. Follow the controls shown in your installed build; the public guide does not provide an authoritative, version-independent click-by-click local playlist procedure.
- Choose manual switching or repeat for each clip. For manual playback, add each clip as its own source or make separate scenes and switch between them during the broadcast. Arrange the sources and set their visibility so the intended clip is shown in the preview.
- Check video and audio. Confirm that the picture fits the canvas, the correct source is visible, and the clip’s sound is present at an appropriate level in the audio mixer. Preview the clips and check how playback behaves when a clip ends before relying on it live.
- Test the sequence. Play every clip in the intended order. If you plan to switch scenes manually, rehearse those switches; if using a playlist-capable source, confirm that it advances through the list as expected.
Use a playlist-capable source when available
If your installed Streamlabs Desktop version offers a VLC video source or another source that supports playlists, you can investigate it for sequential playback. VLC’s playlist documentation explains successive playback of multiple media files in VLC. It does not establish the exact Streamlabs integration or guarantee that every version exposes the same controls.
- Look in the installed version’s available sources for a playlist-capable option, such as a VLC video source, if offered.
- Follow that version’s on-screen controls to add the files and arrange their order. Do not assume that a particular button name or playlist panel exists in every release.
- Play through the full list in preview. Verify the order, transitions, picture sizing, and audio for each file before using it in a broadcast.
If you do not see a playlist-capable source, use separate sources or scenes and switch manually. For version-specific help, consult the Streamlabs Desktop support index.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Elebase USB to USB C Adapter for iPhone 18 Pro Max,USBC Car Charger Adapter
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Connect YouTube and verify the stream before going live
- Check channel eligibility. YouTube says a channel needs to be verified and must have no live-streaming restrictions in the preceding 90 days to go live. Review YouTube’s get-started guide if you cannot start a stream.
- Connect the intended YouTube account and stream. Follow Streamlabs’ YouTube streaming guide to connect the account and prepare the broadcast.
- Inspect the preview and mixer. Before starting publicly, check that the correct clip appears in Streamlabs’ preview and that its audio reaches the mixer. YouTube recommends checking the Live Control Room preview and monitoring audio and video quality when using an encoder; see its live-streaming tips.
- Test privately or unlisted where appropriate. If practical for your channel and stream setup, run a private or unlisted test before the public broadcast. Otherwise, at minimum verify every clip and scene in preview before starting the encoder.
- Start only after confirming playback. Begin the encoder and stream once the intended video and audio are confirmed. Streamlabs’ YouTube guide covers the account connection and source setup path.
Clear rights for every clip and audio track
Use only video, music, and other material for which you have the necessary rights. YouTube’s livestream terms require the provider to have the necessary rights, including music licensing rights. YouTube scans live streams for third-party content; an unresolved match can interrupt or terminate a stream. Even if you have a licence, the rights holder may need to allowlist your channel through Content ID so the live broadcast is not interrupted. YouTube’s copyright help explains more about copyright.
Common problems and fixes
- You cannot find a playlist source. The available sources and controls may depend on your installed Desktop version. Use separate local-file sources or scenes and switch manually, or check the Streamlabs Desktop support index for version-specific guidance.
- Only one clip appears. With manual sources, confirm the intended source is visible and in the right order, or switch to the scene containing the next clip. With a playlist-capable source, check its list and playback in preview rather than assuming it advanced.
- The video appears but has no sound. Check the selected source’s audio and the Streamlabs audio mixer, then preview playback again before going live.
- The clip is cropped, too small, or placed incorrectly. Adjust its size and position in the scene, then verify the result in preview.
- YouTube interrupts the broadcast over third-party content. A video or audio match may trigger an interruption even during a live stream. Use properly cleared material; if it is licensed, confirm whether the rights holder must allowlist your channel through Content ID.
- You cannot start a YouTube live stream. Check channel verification and whether the channel has a live-streaming restriction in the preceding 90 days.
Or let it run in the cloud
If your goal is an always-on YouTube stream from uploaded videos, StreamNeo is a different option from running clips through Streamlabs Desktop: upload a recording or build a playlist, add your YouTube stream key once, and go live. StreamNeo loops uploaded videos from the cloud, so nothing has to stay on at home. Each slot streams the uploaded quality up to 4K 60fps at one flat price per slot, with no re-encode or quality tiers; automatic recovery is included if YouTube drops the stream. The first day is free with no card. Monthly: $9.99 per month.
Quick Recap
Bestseller No. 5
Best Value
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
Sale
UGREEN USB to USB C Adapter Combo 4-Pack, 10Gbps USB C Converter Space Gray
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Rank #2
Anker USB-C Hub, 5-in-1 USB Hub for Laptops, 4K HDMI Multiport Adapter
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Start your free StreamNeo day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
