To enable VRR on PS5, connect the console to a TV input that supports HDMI 2.1 VRR, then open Settings > Screen and Video > Video Output and set VRR to Automatic. Supported games use VRR automatically. You do not need a new cable or TV if your current setup is compatible.
Check that your TV and HDMI input support PS5 VRR
Sony documents PS5 VRR for HDMI 2.1 VRR-compatible TVs and PC monitors. The precise TV model and input matter: an HDMI 2.1 label alone does not guarantee that every port supports VRR. Check the TV manual or manufacturer’s specifications for the input you plan to use, and look for any TV-side setting needed to enable its enhanced HDMI signal. Sony’s PS5 4K and 120 Hz troubleshooting guidance recommends checking the correct HDMI 2.1 port and the TV’s settings. Sony also cautions that results vary by TV and game. Sony’s VRR announcement describes the feature for compatible TVs and PC monitors.
VRR, 120 Hz output and ALLM are separate capabilities. Support for one does not establish support for the others. Sony says 120 Hz output depends on both the TV and game supporting 120 Hz, and not all HDMI 2.1 TVs support ALLM. Check the display’s specifications for each feature.
Turn on VRR in PS5 settings
- Update the PS5 system software. Sony introduced VRR through a console update; its current support instructions show the setting in the Video Output menu. See Sony’s PS5 VRR support page.
- Connect the PS5 to the compatible TV input. Use the port identified by the TV maker as supporting HDMI 2.1 VRR, and enable any required enhanced HDMI setting on the TV.
- Open Settings > Screen and Video > Video Output. The screen includes information about the connected HDMI device and its reported capabilities, including VRR. Sony documents this menu and device information here.
- Set VRR to Automatic. With a compatible display, this lets the display’s refresh rate adjust in sync with the PS5’s graphical output.
- Launch a game that supports VRR. On a supported display, VRR activates automatically for supported games; no separate per-game console switch is needed. Sony’s announcement explains the automatic behavior.
Should you apply VRR to unsupported games?
The Video Output menu includes Apply to Unsupported Games. It is optional: Sony says enabling it may improve or stabilize results in some games, but behavior can vary by game and TV. If you notice unexpected visuals or other unwanted behavior, turn the option off. This setting does not make an unsupported game natively VRR-compatible. Sony’s VRR support page describes the option and its caveat.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minute#1 Best Overall
- Cable length: 3m / 10ft
- Ultra High Speed HDMI Cable Certified (w/ Hologram Sticker)
- 48Gbps bandwidth for latest features HDR, HDCP 2.2 & 2.3, DTS:X, Dolby Atmos, Dolby Vision
- 8K60, 4K120 & up to 10K resolution, Dynamic HDR, eARC, ALLM, QFT, QMS, VRR
- Backward compatible with earlier versions of HDMI and can be used with any HDMI devices.
If VRR is missing or does not seem to work
- Check what the PS5 detects. Return to Settings > Screen and Video > Video Output and inspect the connected HDMI device information. If VRR is not reported, first check the TV connection and input.
- Use the TV’s VRR-capable input. Consult the exact model’s manual; some televisions support the relevant feature only on specified HDMI inputs or require a setting change. Sony’s troubleshooting guidance advises checking the HDMI 2.1 port and TV settings.
- Check the TV’s enhanced signal setting and firmware. Enable the input mode needed for HDMI 2.1 features. Updating TV firmware is also sensible when troubleshooting display signaling; Sony specifically mentions current firmware in its 4K 120 Hz guidance, rather than identifying firmware as the cause of every VRR issue. Read that guidance.
- Temporarily connect the PS5 directly to the TV. A receiver or another device between console and television can affect the signal. Once VRR works in a direct connection, check whether the intermediary supports the needed signal path.
- Try the cable already included with the PS5. Sony recommends it; a suitable Ultra-High-Speed HDMI cable that supports HDMI 2.1 is an alternative. A cable cannot add VRR support to a TV or input that lacks it. Sony’s cable guidance is here.
- Confirm the game’s support. VRR is automatic in supported games. You can try Apply to Unsupported Games if you want, but switch it off if behavior becomes unexpected. Sony explains the setting.
VRR, ALLM and 1440p: useful distinctions
On an ALLM-capable TV, PS5 VRR output automatically switches to low-latency mode even if ALLM is set to Off. To disable ALLM completely, Sony says you must also disable VRR. See Sony’s VRR guidance.
If your TV supports 1440p output, PS5 can test SDR and HDR at 60 Hz and 120 Hz, as well as VRR output, when you select 1440p. That test does not guarantee that every resolution and refresh-rate combination will work on every display. Sony’s 1440p support page explains the test options.
Quick Recap
Best Value
- Cable length: 1.5m / 5ft
- Ultra High Speed HDMI Cable Certified (w/ Hologram Sticker)
- 48Gbps bandwidth for latest features HDR, HDCP 2.2 & 2.3, DTS:X, Dolby Atmos, Dolby Vision
- 8K60, 4K120 & up to 10K resolution, Dynamic HDR, eARC, ALLM, QFT, QMS, VRR
- Backward compatible with earlier versions of HDMI and can be used with any HDMI devices.
Rank #3
- Designed for Multiple Gaming Consoles: Are you tired of constantly switching among multiple gaming devices on your TV? UGREEN HDMI Switch 5 in 1 out makes it a breeze! Connect 5 of your favorite gaming devices such as PS5, Xbox, Switch, Roku, and laptop to your TV with just one input port
- 4K@60Hz Resolution: Immerse yourself in an incredible viewing experience with 4K@60Hz resolution and backward compatibility up to 4K@30Hz, 2560*1440@120Hz, and 1920*1080@240Hz. HDMI switcher supports HDMI 2.0/1.4, HDCP2.2/1.4, VRR, and Dynamic HDR Chroma 4:2:0 / 4:2:2 / 4:4:4. All HDMI ports support HDR/3D/CEC. To achieve 4K@60Hz resolution, the length of the input and output HDMI cable should be within 3m/9ft, AWG30
- Fast & Stable Transmission: This HDMI switch box supports high bandwidth 18Gbps data transmission, and input and output standard AWG30 HDMI cable length could reach up to 9 FT. USB Powered design ensures stable video transmission and better performance. No frames or images are lost, making your game run smoothly. To ensure proper operation, ensure that the switch is connected to a power source when using
- Convenient Remote Control & Manual Switch: Effortlessly switch between gaming devices from the comfort of your couch or bed with the remote control (The control range is within 33 FT). A manual switch lets you switch among 5 devices at any time with a flick of a button. With 5 LED indicators that clearly show you which port is active. NOTE: Automatic switching is NOT supported
- Compatible with Most Devices: UGREEN 4K HDMI splitter is compatible with a wide range of HDMI source devices, including Nintendo Switch/Switch 2, PS5/3/4/4 pro, Blu-ray players, Fire TV stick, Xbox 360, Xbox series x, Apple TV, DVD players, Roku, PC, laptop, HDTV, and projectors. (PACKAGE: 1*HDMI Switch, 1*Remote, 1*USB Power cable, 1*User Manual)
Rank #2
- 8K HDMI 2.1 Cable: This HDMI cable supports 8K@60Hz and 4K@240Hz/120Hz/144Hz, with backward compatibility for 4K@60Hz, 2K and 1080p; delivers sharp, detailed visuals for TVs, monitors and projectors
- 48Gbps Ultra High Speed: This HDMI to HDMI cable delivers up to 48Gbps bandwidth for stable video and audio transmission; backward compatible with HDMI 2.0, 1.4, 1.3 and 1.2 devices
- Built for Gaming: This eARC HDMI cable supports 4K@240Hz and 8K@60Hz for PS5, Xbox Series X, gaming monitors and TVs; VRR helps reduce screen tearing on compatible devices for smoother gameplay
- eARC and Immersive Audio: Supports eARC/ARC, Dolby Vision and Dolby Atmos on compatible devices, This 8K HDMI cord is ideal for soundbars, home theaters, streaming devices and high-resolution displays
- Durable Braided Design: High-purity copper core, aluminum alloy shell and braided jacket help resist EMI, bending and daily wear; available for 3ft, 6ft and 10ft setups
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
