For most TVs, start with Settings > Screen and Video > Video Output, leave Resolution on Automatic, and check Current Video Output Signal. Automatic selects the highest resolution the connected TV supports; it does not mean every game renders internally at that resolution. For 4K/120 Hz, the game, display, HDMI connection and console output settings must all support the mode.
What PS5 graphics settings should you use?
Use these as practical starting points, then confirm what the console is actually sending and how your games behave:
- Resolution: Automatic for most setups. Choose 2160p only if you specifically want to force 4K output and have a compatible 4K screen.
- 120 Hz Output: Automatic if your TV or monitor supports 120 Hz and you play compatible games. This enables a 120 Hz video mode; it does not make every game run at 120 frames per second.
- HDR: On When Supported is a predictable default if you want HDR only for HDR-compatible games and apps. Adjust HDR to configure brightness.
- VRR: Enable it if your display supports HDMI 2.1 VRR; results depend on the display and game.
- Video Transfer Rate: Leave on Automatic unless you are troubleshooting a flickering or unstable 4K signal.
To inspect the actual connection, open Settings > Screen and Video > Video Output and read Current Video Output Signal. Sony says the PS5 detects TV capabilities and selects the best available resolution in Automatic mode (PlayStation Support: PS5 4K resolution guide).
How should you set PS5 resolution?
Automatic or 2160p for a 4K TV
Automatic is the sensible first choice: the console detects the connected TV’s capabilities and chooses the highest supported resolution. If you need to force 4K, select 2160p under Video Output, provided the PS5 is connected to a compatible 4K screen. Check Current Video Output Signal afterward.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Console output resolution and a game’s internal rendering resolution are not the same thing. A 2160p output setting does not prove that a game is rendering every frame natively at 4K; games can use different rendering techniques and resolutions.
Using a 1440p monitor
PS5 supports 1440p output on compatible TVs and monitors. In Settings > Screen and Video > Video Output, select Test 1440p Output to check combinations of SDR or HDR, 60 Hz or 120 Hz, and VRR. Sony notes that results vary by TV. If the test succeeds and you want 1440p, set Resolution to 1440p. Sony also says a game with a higher native resolution, such as 4K, may benefit from improved anti-aliasing when downsampled to 1440p (PlayStation: PS5 features).
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
How do you get 4K at 120 Hz on PS5?
4K/120 Hz depends on the complete signal chain, not a single console switch. The display and game must support the mode, and the right HDMI port, cable, display firmware, console settings and any receiver or other intermediary must also cooperate. Sony documents 4K/120 Hz output support but warns users may encounter issues as the technology transitions across the market (PlayStation Support: PS5 4K resolution guide).
- Confirm the display and game: Check the TV or monitor manual for 4K/120 Hz support on the specific HDMI input you are using, and verify that the game supports a 120 Hz frame-rate mode.
- Update the display: Install current TV or monitor firmware.
- Use the right port and cable: Connect the PS5 to the display’s appropriate HDMI port. Start with the cable supplied with the console; if replacing it, use an Ultra High Speed HDMI cable rated for 4K/120 Hz.
- Check intermediaries: For troubleshooting, connect directly to the display or verify that a receiver or other device in the path supports the required mode.
- Check PS5 output settings: Set Resolution to Automatic or 2160p, and Video Transfer Rate to Automatic. Enable 120 Hz Output for compatible displays and games.
- Verify the signal: Return to Current Video Output Signal and check the resolution and refresh rate the PS5 is actually outputting.
The HDMI 2.1 label alone does not guarantee that every port supports every feature. Check the display’s manual for the specific input and mode.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
What do the PS5 HDR settings do?
Under Settings > Screen and Video > Video Output, HDR offers two behaviors:
- On When Supported: HDR-compatible games and apps use HDR; unsupported content remains SDR.
- Always On: The console converts even non-HDR games and apps to HDR output.
On When Supported is a predictable compatibility choice, not a universal picture-quality rule. Choose based on your display and preference. Use Adjust HDR to set brightness and optimize HDR rendering.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
What do VRR and ALLM do?
VRR
Variable refresh rate (VRR) lets a compatible display synchronize its refresh rate with the PS5’s graphical output. It requires a compatible HDMI 2.1 VRR TV or monitor, and the effect varies by display and game. Sony provides an Apply to Unsupported Games option that you can try with games that do not support VRR; turn it off if you notice unexpected behavior.
ALLM
Auto low-latency mode (ALLM) signals a compatible TV to switch to its low-latency mode during gameplay. Availability depends on the TV, so check the display manual instead of relying only on an HDMI version label. The PS5 does not send an ALLM signal while a media app is running. When VRR output is active, the display switches to low-latency mode even if ALLM is Off; to disable ALLM completely, turn VRR off too. Sony describes these behaviors in its PS5 features overview and 4K resolution guide.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
What is PSSR, and does every PS5 support it?
PSSR means PlayStation Spectral Super Resolution. Sony describes it as an image-quality feature for certain compatible games, not a setting used by every PS5 game. Sony’s support guide limits Enhance PSSR Image Quality to the CFI-7000 model group; it applies to certain PSSR-compatible games. If the option appears and a game behaves unexpectedly, Sony advises turning it off. The support information cited here does not establish a universal list of compatible games (PlayStation Support: PS5 4K resolution guide).
PSSR is distinct from choosing 1440p output. Sony’s 1440p feature description says downsampling a higher-native-resolution game may improve anti-aliasing on a compatible 1440p display; that does not mean PSSR is involved.
Why is my PS5 screen flickering or missing a video mode?
Try a lower Video Transfer Rate for 4K flicker
If the screen flickers at 4K, Sony suggests trying Video Transfer Rate -1 or -2 under Settings > Screen and Video > Video Output. These settings limit available formats, so treat them as troubleshooting rather than an image-quality upgrade, and check Current Video Output Signal after each change.
- -1: Restricts 4K 120 Hz, 4K 50/60 Hz RGB or YUV444 DeepColor, and 8K 60 Hz on the CFI-7000 model group.
- -2: Restricts 4K 120 Hz, 4K 50/60 Hz RGB or YUV444, and 8K 60 Hz on the CFI-7000 model group; 4K at 50/60 Hz uses YUV420.
If 120 Hz or 4K is not available
- Recheck whether the exact display input supports the desired resolution and refresh rate.
- Confirm the game supports the desired frame-rate mode; 120 Hz output does not force every title to run at 120 fps.
- Check that the PS5 is connected to the correct HDMI port and that any receiver or intermediary supports the mode.
- Try the included cable or a suitable Ultra High Speed HDMI cable rated for 4K/120 Hz, then verify the Current Video Output Signal.
- If a display has video-output problems with 120 Hz games, Sony suggests turning the 120 Hz Output setting off.
Does PS5 support 8K output?
Sony documents Allow 8K Output only for consoles in the CFI-7000 model group. The documented mode requires an 8K display supporting 60 Hz and DSC, as well as games that support 8K. This is a model- and content-specific capability, not a general setting for every PS5 (PlayStation Support: PS5 4K resolution guide).
Recommended Free Tools
How should you compare two display modes?
When deciding between modes, compare what the console and game actually deliver rather than relying on labels alone:
Quick Recap
- The resolution and refresh rate shown in Current Video Output Signal.
- Whether the specific game supports the target frame rate.
- Whether the content is HDR or SDR and how your display handles it.
- Whether VRR works with the display and game as expected.
- Whether the cable, HDMI port and any intermediary support the mode.
- For a 1440p display, whether the tested SDR/HDR, 60/120 Hz and VRR combinations work on that particular screen.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
