As of October 7, 2026, the available official sources do not confirm a widespread ARC Raiders outage. If you cannot connect or matchmaking is slow, the cause could be a service-side problem or a setting or connection on your side; check for a current official notice, then work through the steps below.
Are ARC Raiders servers down?
A widespread outage was not officially confirmed in the sources reviewed as of October 7, 2026. That does not rule out a developing or localized problem: service availability can change, and individual connection trouble does not by itself prove that the servers are down.
ArcStatus, an unofficial tracker, recorded 44 community outage reports on October 3, 2026, and marked that incident resolved after 35 minutes. Those reports provide historical context, not official confirmation of the cause or evidence of an active outage on October 7. Embark’s official Help Center guidance is about troubleshooting, rather than a live service-status notice: matchmaking issues and PC connection issues.
To judge whether the issue is broader than your own setup, look for a dated service notice from ARC Raiders or Embark and compare reports from other players. The sources here do not provide an official live status indicator, so treat third-party report spikes as signals to check, not as proof that Embark has confirmed an outage.
#1 Best Overall
- Blazing-fast WiFi 7 boosts tri-band throughput up to 12000 Mbps with 320 MHz channels of 6 GHz band, Multi-Link Operation (MLO) and 4K-QAM
- Powerful wired network capacity of up to 20G with one 2.5G WAN port and seven 2.5G LAN ports.
- High-performance quad-core 2.0GHz CPU with robust cooling, 2GB RAM and eight internal antennas providing up to 3000 sq. ft. of range.
- Smart Home Master makes it easy to set up functional subnetwork (up to 3 SSIDs) for IoT devices and VPNs
- ROG-exclusive Gaming Network streamlines Triple-Level Game Acceleration setup and connections through convenient SSIDs
Why is ARC Raiders matchmaking taking so long?
Embark’s matchmaking guidance, last updated February 27, 2026, identifies crossplay being turned off as a common reason for slow matchmaking. Crossplay supports social play across PlayStation, Xbox, and PC. Embark says, “Turning Crossplay on can help you find games faster.” In a party, the most restrictive member’s crossplay setting applies to the whole group, so check every party member’s setting.
Embark also recommends checking the selected server region and syncing your device clock if you cannot find a match. These are troubleshooting checks, not confirmation that any one setting is causing a wider queue problem.
Rank #2
- Beyond-fast WiFi 7 (802.11be) with new 320MHz channels in the 6 GHz band and 4096-QAM significantly increases network capacity and throughput, with speeds of up to 30 Gbps
- Multi-link Operation links to multiple bands at the same time to ensure stable internet connections and efficient data transfers
- Cutting-edge external dual-feeding antennas boost coverage by providing high efficiency and significantly enhanced signal strength
- Maximized wired connectivity and flexibility with dual 10G ports and quad 2.5G ports
- Triple-Level Game Acceleration - The GT-BE98 Pro boosts your PC gaming traffic every step of the way, from your PC gaming port all the way to the game server.
How to troubleshoot connection and matchmaking problems
- Check for a current service notice. Look for dated communications from ARC Raiders or Embark, and compare whether other players are reporting similar problems. If there is a service-side incident, changing your local settings will not repair it.
- Turn on crossplay if the queue is slow. Check the crossplay setting for each person in your party; the most restrictive party member’s setting governs the group’s matchmaking.
- Set the server to Automatic. On PC, open the gear menu and go to Gameplay > Server. On console, open Social, select the gear icon, then go to Gameplay > Server. Embark recommends Automatic for PC and console.
- Sync your device clock. Embark recommends this if you cannot find a match or can join standard maps but not map conditions. An incorrect clock can also contribute to connection trouble.
- Check your local connection on PC. Embark recommends a stable connection and wired Ethernet over Wi-Fi. It also suggests avoiding VPNs or proxies where possible and checking your local network. A wired connection may help with local instability, but it cannot fix a problem at the game service.
- Contact official support if it continues. Use the ARC Raiders Help Center to find technical support and submit a ticket.
Does the matchmaking change explain server reports?
No connection between the matchmaking intervention and the October 3 community outage reports is established in the cited announcements. In a September 30, 2026 Steam post, ARC Raiders Executive Producer Aleks said action against coordinated queue teaming was followed, after five days, by 85% fewer players engaging in that behavior. Aleks also reported spoiled raids declining from around 1 in 50 to 1 in 300, with no meaningful queue-time impact. Those figures describe the queue-teaming intervention, not server availability or outage severity.
Embark’s September 29 announcement said the Frozen Trail update was due October 8 and that there would be no update the preceding Tuesday while the team prepared. It does not link the planned update to the October 3 reports.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsQuick Recap
Best Value
- DUAL-BAND WIFI 6 ROUTER: Wi-Fi 6(802.11ax) technology achieves faster speeds, greater capacity and reduced network congestion compared to the previous gen. All WiFi routers require a separate modem. Dual-Band WiFi routers do not support the 6 GHz band.
- AX1800: Enjoy smoother and more stable streaming, gaming, downloading with 1.8 Gbps total bandwidth (up to 1200 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz). Performance varies by conditions, distance to devices, and obstacles such as walls.
- CONNECT MORE DEVICES: Wi-Fi 6 technology communicates more data to more devices simultaneously using revolutionary OFDMA technology
- EXTENSIVE COVERAGE: Achieve the strong, reliable WiFi coverage with Archer AX1800 as it focuses signal strength to your devices far away using Beamforming technology, 4 high-gain antennas and an advanced front-end module (FEM) chipset
- OUR CYBERSECURITY COMMITMENT: TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
Rank #4
- Tri-band 2.4GHz + 5GHz + 6GHz; latest WiFi 6E supports 8-streams on tri-band simultaneously, up to 6.6Gbps speed
- AI QoS; satisfies all users' needs by automatically prioritizing data packets
- Powerful processor; 1.8 GHz quad core processor delivers ultra fast and reliable connections
- Mystic light; sync RGB light effects with mystic light compatible products
- Game accelerator; provides an uninterrupted WiFi connection for immersive gaming experiences
Rank #3
- 𝐅𝐮𝐭𝐮𝐫𝐞-𝐑𝐞𝐚𝐝𝐲 𝐖𝐢-𝐅𝐢 𝟕 - Designed with the latest Wi-Fi 7 technology, featuring Multi-Link Operation (MLO), Multi-RUs, and 4K-QAM. Achieve optimized performance on latest WiFi 7 laptops and devices, like the iPhone 16 Pro, and Samsung Galaxy S24 Ultra.
- 𝟔-𝐒𝐭𝐫𝐞𝐚𝐦, 𝐃𝐮𝐚𝐥-𝐁𝐚𝐧𝐝 𝐖𝐢-𝐅𝐢 𝐰𝐢𝐭𝐡 𝟔.𝟓 𝐆𝐛𝐩𝐬 𝐓𝐨𝐭𝐚𝐥 𝐁𝐚𝐧𝐝𝐰𝐢𝐝𝐭𝐡 - Achieve full speeds of up to 5764 Mbps on the 5GHz band and 688 Mbps on the 2.4 GHz band with 6 streams. Enjoy seamless 4K/8K streaming, AR/VR gaming, and incredibly fast downloads/uploads.
- 𝐖𝐢𝐝𝐞 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞 𝐰𝐢𝐭𝐡 𝐒𝐭𝐫𝐨𝐧𝐠 𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧 - Get up to 2,400 sq. ft. max coverage for up to 90 devices at a time. 6x high performance antennas and Beamforming technology, ensures reliable connections for remote workers, gamers, students, and more.
- 𝐔𝐥𝐭𝐫𝐚-𝐅𝐚𝐬𝐭 𝟐.𝟓 𝐆𝐛𝐩𝐬 𝐖𝐢𝐫𝐞𝐝 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 - 1x 2.5 Gbps WAN/LAN port, 1x 2.5 Gbps LAN port and 3x 1 Gbps LAN ports offer high-speed data transmissions.³ Integrate with a multi-gig modem for gigplus internet.
- 𝐎𝐮𝐫 𝐂𝐲𝐛𝐞𝐫𝐬𝐞𝐜𝐮𝐫𝐢𝐭𝐲 𝐂𝐨𝐦𝐦𝐢𝐭𝐦𝐞𝐧𝐭 - TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
