What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
For a strong Nintendo Switch starting point, update the console and game, disable gamepad acceleration, set Gamepad Sensitivity to 1.2 and Aiming Sensitivity to 0.8, then begin with Auto Aim Damping at 0.6 and Auto Aim Strength at 0.5. Use first-person view with Right Shoulder as the alternate camera, and add gyro only for small corrections if it feels consistent. These numbers come from a published controller guide for Xbox and PC, so treat them as a baseline—not a Switch-tested universal solution.
The recommended Switch baseline
HYPERCHARGE: Unboxed is a first- and third-person shooter built around action-figure combat. Digital Cybercherries lists Nintendo Switch as a supported platform, with the Switch version released on 27 April 2020 and listed at $24.99 in its 2020 press kit. The best settings are therefore less about finding one magic number and more about balancing four things: how quickly the reticle turns, how precisely it stops, how much aim assistance corrects your movement, and whether the camera gives you enough awareness.
As an Amazon Associate I earn from qualifying purchases.
Use the following profile for your first few matches. Change only one value at a time after you have played long enough to identify a consistent problem.
Free tools Windows power users keep installed
One-click scans. No signup required.
| Setting | Starting value | Why start here | Evidence and qualification |
|---|---|---|---|
| Gamepad acceleration | Off | Removes an additional speed curve while you learn your stick response. | Recommended by a published Hypercharge controller guide; the guide targets Xbox and PC rather than Switch. |
| Gamepad Sensitivity | 1.2 | Provides a moderately quick turn without immediately sacrificing fine control. | Third-party starting point from the Xbox/PC guide, not a Switch measurement. |
| Aiming Sensitivity | 0.8 | Slows aimed movement relative to broad camera turns, helping small corrections. | Third-party starting point from the Xbox/PC guide, not a Switch measurement. |
| Auto Aim Damping | 0.6 | Leaves noticeable assistance while avoiding the strongest possible slowdown near a target. | Third-party starting point from the Xbox/PC guide, not a Switch measurement. |
| Auto Aim Strength | 0.5 | Supplies moderate target correction without making every correction feel automatic. | Third-party starting point from the Xbox/PC guide, not a Switch measurement. |
| Camera | First Person | Keeps the reticle and target relationship direct for learning sensitivity. | The same guide recommends First Person with Right Shoulder as the alternate camera pairing. |
| Alternate camera | Right Shoulder | Places the over-the-shoulder view on a shoulder button that is easy to reach during movement. | Third-party recommendation; choose the side that feels natural if your layout differs. |
| Gyro | Optional, low-intensity correction | Use motion for the last few degrees of adjustment while the stick handles large turns. | A major update improved overall gyro usability, but no authoritative source establishes a universal Switch sensitivity. |
Update before changing controls
Settings cannot compensate for an outdated build or a console that is struggling to launch software. Nintendo lists Switch system version 23.0.1 as released on 1 October 2026, including a fix for software that could take a long time to start, pause, or close. On your Switch, open System Settings, choose System, and select System Update. Let the console restart if it requests one.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Also install any available HYPERCHARGE: Unboxed update through the HOME menu. Highlight the game, press the + button, choose Software Update, then select Via the Internet. Restart the game after the update completes. Do this before comparing sensitivity: an update can alter input behavior, UI responsiveness, gyro handling, or aim-magnetism, making an old comparison misleading.
How to configure the controller profile
1. Disable acceleration, if the option appears
Open the game’s settings from its main menu and locate the controller or gamepad section. If you see a Gamepad Acceleration toggle, switch it off. Acceleration makes the same physical stick distance produce different turn speeds depending on how quickly you move the stick. That can feel useful for rapid 180-degree turns, but it makes it harder to build repeatable muscle memory when aiming at small targets.
If your Switch build does not show the option, do not assume the game is malfunctioning. Use the sensitivity controls that are available and judge the response by the distance your reticle travels for a short, deliberate stick movement.
2. Set broad camera movement to 1.2
Set Gamepad Sensitivity to 1.2 as the initial value recommended in the published controller guide. This is the setting to change when ordinary camera turns feel too slow or too fast before you are aiming down a target line.
- If you cannot turn far enough to check a doorway without lifting your thumb, increase it one increment.
- If the reticle overshoots every target during hip-fire, decrease it one increment.
- If broad turns feel correct but aimed shots are unstable, leave this value alone and adjust Aiming Sensitivity instead.
3. Set aimed movement to 0.8
Set Aiming Sensitivity to 0.8. A lower aimed value than your general camera value gives you a slower correction window when tracking an enemy or lining up a shot. It should not prevent a fast turn; it should make the final portion of that turn easier to stop.
Test it on a target that moves across your screen. If your reticle repeatedly trails behind, raise the value slightly. If it swings past the target and requires a second correction, lower it. Make only one change, then repeat the same test so you know whether the change helped.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Auto aim: balancing assistance and control
Auto aim settings affect the way the reticle behaves near an opponent. They do not replace positioning or timing, and the ideal amount depends on your stick control, distance to the target, and whether you play first- or third-person.
Auto Aim Damping at 0.6
Begin with Auto Aim Damping 0.6. Damping controls how strongly your movement is slowed or shaped as you pass over a target. At a moderate value, the reticle should be easier to settle without feeling as if it is trapped in place.
- Lower damping when the reticle feels sticky, especially when you try to move from one enemy to another.
- Raise damping when you consistently sweep past small enemies and cannot settle on their hit area.
- Make the adjustment in small steps; a large change can disguise whether the real problem is sensitivity.
Auto Aim Strength at 0.5
Begin with Auto Aim Strength 0.5. Strength determines how much the game helps pull your aim toward a target. Moderate assistance can reduce the effect of small thumb movements, but excessive strength may make manual target selection feel less predictable when opponents are close together.
Reduce strength if you prefer to choose every target yourself or if the reticle jumps toward an unintended enemy. Increase it if tracking small enemies is difficult even after you have found a comfortable aiming sensitivity. The published values are from an Xbox/PC guide, so the correct Switch value may differ with your controller, display, and play style.
First-person or third-person camera?
First-person for direct aiming
First-person view puts the reticle at the center of the screen and removes your character model from the aiming path. It is a useful starting point because sensitivity changes are easy to evaluate: you can see exactly how far the crosshair travels when you move the stick.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsUse first-person while learning the baseline profile, especially if you are diagnosing overshooting, sluggish turns, or inconsistent stopping. It also gives you a clean reference when deciding whether gyro movement is helping.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Right-shoulder camera for awareness
The published guide recommends pairing the third-person option with Right Shoulder as the alternate camera. An over-the-shoulder view can show more of your action figure and nearby space, which may help when checking corners or fighting around cover. It also changes the visual relationship between the reticle and the character model, so a sensitivity that feels precise in first-person may feel different here.
Use the same target and the same movement test in both views. Do not raise sensitivity simply because the third-person camera looks slower; first confirm whether the camera is actually preventing you from turning or whether the different perspective is changing your perception.
Using gyro aiming on Nintendo Switch
A major HYPERCHARGE update reported improved overall gyro usability. That makes motion aiming worth testing, but the available evidence does not establish a single best gyro sensitivity for Switch. Treat gyro as a second input rather than an automatic replacement for the sticks.
A practical hybrid method
- Leave the stick profile at your tested baseline.
- Enable gyro in the game’s controller settings if the option is available.
- Use the right stick for large horizontal turns and rapid direction changes.
- Tilt the controller gently for the last few degrees needed to place the reticle on a small target.
- Play several minutes without changing stick sensitivity. Decide whether motion corrections are helping before changing another value.
Keep the console in a comfortable, repeatable position. Resting your wrists on a different surface between matches can make gyro feel inconsistent even when the setting has not changed.
When to disable gyro
Turn gyro off if normal hand movement causes the reticle to drift, if you have to hold the controller in an uncomfortable position, or if motion corrections fight your stick inputs. A stable stick-only profile is better than a theoretically faster system that you cannot reproduce from one match to the next. No source in the available evidence proves that gyro is universally more accurate than sticks on Switch.
What the documented updates can—and cannot—do for performance
A major update report documents lower texture-memory use resulting from corrected mesh and texture settings, improved UI performance, improved overall gyro usability, and improved thumbstick movement in the interface. The developer’s announcement archive also reports improved level-of-detail performance on character meshes, more consistent gamepad UI and HUD icons, and fixes affecting auto-aim or aim-magnetism on some enemies.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Those are software changes, not a guarantee of a fixed frame rate. No authoritative source in the available material gives a current Switch resolution, a frame-rate target, or a universal graphics-quality preset for every mode. Avoid promises such as “the game always runs at 60 fps” or claims that a particular graphics mode exists unless a later official specification confirms them.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchPC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Settings that can make performance feel worse
Even without a selectable graphics preset, perceived smoothness can vary with what is happening on screen. Large fights, effects, and rapid camera movement make interruptions easier to notice. To evaluate whether an update or setting helped, compare the same activity rather than judging one unusually busy encounter.
- Use the same game mode and a similar number of enemies.
- Compare menu navigation as well as combat; UI responsiveness is one of the documented improvement areas.
- Check whether a pause or launch delay still occurs after updating the console and software.
- Do not treat a single hitch as proof of a permanent frame-rate limit.
A repeatable way to tune every value
Randomly changing several sliders makes it impossible to learn which one solved the problem. Use a controlled loop instead.
- Choose one test situation. Use a low-pressure match or training context where you can turn, track, and stop without being eliminated immediately.
- Record the current values. Write down Gamepad Sensitivity, Aiming Sensitivity, Auto Aim Damping, Auto Aim Strength, camera view, and gyro state.
- Identify one symptom. Examples include slow 180-degree turns, overshooting a stationary target, a sticky reticle, or motion drift.
- Change one setting by one small increment. Do not alter sensitivity and aim assistance at the same time.
- Repeat the same movement. Use the same target distance and direction where possible.
- Keep or undo the change. If the symptom improves without creating a new one, keep the value and move to the next issue.
- Test in a real match. A setting that feels perfect against a stationary target may be too slow when an enemy crosses your path.
Choose a profile by the problem you are solving
| Your priority | Suggested starting approach | What to watch for |
|---|---|---|
| Fast turns and checking behind you | Keep Gamepad Sensitivity at 1.2 first; raise it only if you cannot complete the turn comfortably. | Higher speed can make the final aiming correction unstable. |
| Small-target precision | Keep Aiming Sensitivity at 0.8; use moderate aim assistance and consider hybrid gyro. | Too much damping can make switching between nearby targets feel sticky. |
| Minimal assistance | Lower Auto Aim Strength gradually from 0.5, then adjust damping if the reticle still catches. | Manual aiming may expose overshooting that requires a lower Aiming Sensitivity. |
| Maximum help while learning | Keep the 0.6 damping and 0.5 strength baseline before increasing either value. | Strong assistance can hide poor stick technique and feel unpredictable around groups. |
| Motion aiming | Use the stick for broad turns and gyro for small corrections. | Disable gyro if drift or inconsistent hand position outweighs its benefit. |
| Clear visual reference | Start in First Person, then compare the Right Shoulder third-person view. | The same numerical sensitivity may feel different because the camera perspective changes. |
Troubleshooting common aiming symptoms
The reticle overshoots every target
First lower Aiming Sensitivity slightly while leaving Gamepad Sensitivity unchanged. If the reticle only overshoots when it reaches an enemy, reduce Auto Aim Strength or Damping one at a time. Confirm that acceleration is off if the option is present.
The camera cannot turn quickly enough
Raise Gamepad Sensitivity by a small increment and retest a full turn. Do not immediately increase Aiming Sensitivity; that can make close-range precision worse while failing to solve broad camera movement.
Recommended Free Tools
The reticle sticks to the wrong enemy
Lower Auto Aim Strength first. If the slowdown itself is the issue, lower Auto Aim Damping instead. Test the change against two nearby targets so you can tell whether target selection has become more predictable.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Tracking small enemies is difficult
Check that Aiming Sensitivity is not so low that you cannot follow movement. If your hand control is steady, raise Auto Aim Strength slightly from the 0.5 baseline. If the problem occurs only in one camera view, compare first-person and Right Shoulder before changing several values.
Gyro aim feels inconsistent
Use a stable seated posture, recalibrate any available motion control, and repeat the same short correction. If the reticle still drifts or your natural hand movement constantly changes aim, turn gyro off and keep the stick profile.
The game still pauses or takes a long time to start
Verify the Switch system update and the game update, then restart the console. Version 23.0.1 of the Switch system, released 1 October 2026, includes a fix for software that could take a long time to start, pause, or close. If the behavior continues after updating, note whether it happens at launch, during a pause, or while closing; those are different symptoms and should not be treated as an aiming-setting problem.
Controller and gyro accessories
A controller with dependable sticks or motion sensors can make a tuned profile easier to reproduce, but an accessory cannot create a universal best sensitivity. If you consider one, prioritize a comfortable grip, consistent stick centering, and motion sensors that do not introduce drift. Confirm compatibility with Nintendo Switch and the game before buying. Retail stock, pricing, and affiliate availability change, so they are not included here.
What is established and what remains uncertain
The documented evidence supports the update-related improvements, the existence of the Switch version, and the published Xbox/PC controller starting values. It does not establish a Switch-specific numeric sensitivity profile, a controlled gyro-versus-stick accuracy comparison, a fixed frame-rate target, or a current resolution for every mode.
That distinction matters when you tune. Use 1.2, 0.8, 0.6, and 0.5 as measured starting references from the published guide, not as official Switch specifications. Keep the profile that lets you make repeatable turns and corrections in your own matches, and record changes so you can return to a known-good setup after an update.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →
