The best PC graphics settings for Borderlands 4 depend on your GPU and resolution. Start with the official NVIDIA or AMD profile for your graphics card, then tune from there. If you have an RTX 4070, one independently tested balanced starting point is medium settings for most options, low foliage and volumetrics, balanced upscaling, and motion blur set to 0. These profiles are starting points—not guaranteed results for every PC or game build.
What performance do Borderlands 4’s PC requirements target?
2K’s requirements page, published June 17, 2025 and updated May 29, 2026, gives two performance targets. They are publisher expectations, not guaranteed frame rates in every scene.
| Target | CPU | Memory | GPU | Other requirements |
|---|---|---|---|---|
| 1080p, 30 FPS, Low | Intel Core i7-9700 or AMD Ryzen 7 2700X | 16 GB RAM | NVIDIA RTX 2070, AMD RX 5700 XT, or Intel Arc A580; at least 8 GB VRAM | Windows 10/11 64-bit, DirectX 12, 100 GB available storage on an SSD |
| 1440p, 60 FPS, Medium | Intel Core i7-12700 or AMD Ryzen 7 5800X | 32 GB RAM | NVIDIA RTX 3080, AMD RX 6800 XT, or Intel Arc B580; at least 12 GB VRAM | Windows 10/11 64-bit, DirectX 12, 100 GB available storage on an SSD |
Use the official Borderlands 4 PC system requirements to check your setup. Meeting a target spec does not establish that every area will maintain the listed frame rate.
Which graphics profile should you start with?
Use the official profile for your GPU and resolution
The official AMD and NVIDIA guides vary settings by card and resolution, so use the closest matching profile rather than copying one made for a much faster GPU. Their settings are vendor targets, not independent performance guarantees.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minute#1 Best Overall
- Powered by Radeon RX 9070 XT
- WINDFORCE Cooling System
- Hawk Fan
- Server-grade Thermal Conductive Gel
- RGB Lighting
For instance, AMD’s 1080p RX 5700 XT profile targets 60+ FPS with FSR Quality, low geometry and textures, and most effects low. Its RX 6800 XT profile allows much higher detail in several categories while retaining FSR Quality and frame generation. At 1440p, the RX 6700 XT profile shifts to FSR Balanced and low foliage, fog, clouds, and shadows. NVIDIA’s 1080p RTX 2070 profile targets 30 FPS with DLSS Quality and mostly low settings; its RTX 5090 1080p example targets 60+ FPS with DLSS Performance, DLSS frame generation, and 4x multi-frame generation. These differences show why a settings recipe should match the GPU and display resolution.
RTX 4070 balanced starting settings
PCGamesN tested the following combination on an RTX 4070. It is a useful starting point if you have similar hardware, not a universal best preset:
Rank #2
- Powered by the NVIDIA Blackwell architecture and DLSS 4
- Powered by GeForce RTX 5070
- Integrated with 12GB GDDR7 192bit memory interface
- PCIe 5.0
- NVIDIA SFF ready
| Setting | Starting point |
|---|---|
| Upscaling | DLSS Balanced on NVIDIA; use FSR or XeSS on compatible non-NVIDIA cards where available |
| Frame generation | On if supported and you find the result acceptable |
| HLOD loading range, geometry, textures, texture-streaming speed, shadows, lighting, reflections, shading, post-processing | Medium |
| Foliage density, volumetric fog, volumetric clouds | Low |
| Motion blur amount | 0.0 |
In that PCGamesN test, the RTX 4070 averaged 134 FPS at 1080p, 126 FPS at 1440p, and 85 FPS at 4K. The corresponding 1% lows were 51, 50, and 33 FPS. Those are results from that outlet’s test, not predictions for another PC; the gap between averages and lows is a reason to assess consistency as well as peak performance. The guide was published in September 2025, and these figures have not been established as current-build results for October 2026.
How should you use upscaling and frame generation?
Upscaling is a built-in way to trade some image clarity for performance. 2K says an available DLSS, FSR, TSR, or XeSS method can improve frame rates. In Borderlands 4, find it at Options > Visuals > Advanced > Resolution Scaling. Choose the method supported by your GPU, then start with the quality level in the matching vendor profile.
Rank #3
- System Compatibility Note: This 2‑slot card measures 249 mm (L) x 132 mm (W) x 41 mm (H) and requires a single 8‑pin power connector. Please verify available chassis clearance and ensure your power supply is rated for a recommended 550W before purchase.
- Dedicated Support: Please contact us directly through Amazon for any product questions or assistance you may require.
- Next‑Gen AMD RDNA 4 Architecture: Powered by the AMD Radeon RX 9060 XT GPU with 32 Compute Units featuring 3rd Gen Ray Tracing and 2nd Gen AI Accelerators, delivering exceptional 1440p gaming and AI‑enhanced performance.
- Blazing‑Fast Engine Clock: Delivers a boost clock of up to 3290 MHz and a game clock of 2700 MHz out of the box, providing the raw power for smooth, high‑framerate gameplay.
- 16GB GDDR6 Memory on 128‑Bit Bus: Equipped with 16GB of high‑speed GDDR6 memory running at 20 Gbps, offering ample capacity and bandwidth for modern game textures and creative applications.
On Windows 10, 2K says Hardware-accelerated GPU scheduling must be enabled and the PC rebooted for upscaling to work. According to the support guide, it is enabled by default on Windows 11. See 2K’s PC troubleshooting and optimization guide for the setting and further details.
Frame generation is available only on supported hardware and profiles. Treat it as an optional setting to test, not a fix for stutter or poor responsiveness. In PC Gamer’s 2025 launch-period RTX 5090 test, DLSS Performance raised average frame rate but looked somewhat fuzzy; the outlet did not establish that frame generation improved how the game felt. That test averaged about 40 FPS indoors at 4K on Badass without upscaling or frame generation, illustrating that even a high-end card can benefit from the right performance settings.
Rank #4
- NVIDIA Ampere Streaming Multiprocessors: The all-new Ampere SM brings 2X the FP32 throughput and improved power efficiency.
- 2nd Generation RT Cores: Experience 2X the throughput of 1st gen RT Cores, plus concurrent RT and shading for a whole new level of ray-tracing performance.
- 3rd Generation Tensor Cores: Get up to 2X the throughput with structural sparsity and advanced AI algorithms such as DLSS. These cores deliver a massive boost in game performance and all-new AI capabilities.
- Axial-tech fan design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure.
- OC Mode : 1500 MHz (Boost Clock)/Default Mode : 1470 MHz (Boost Clock)
How to tune Borderlands 4 without misreading performance
- Check your hardware against the publisher’s targets. Confirm your CPU, GPU VRAM, RAM, and SSD meet the relevant requirements; the targets are 1080p/30 FPS on Low at minimum and 1440p/60 FPS on Medium for recommended hardware.
- Update your graphics driver. 2K includes driver updates among its PC troubleshooting steps.
- Load the closest GPU-and-resolution profile. Start with the appropriate official AMD or NVIDIA chart rather than a high-end example from a different card.
- Enable an available upscaler. Use Options > Visuals > Advanced > Resolution Scaling, and check the Windows scheduling requirement if you are on Windows 10.
- Change a small number of settings, then give the game time. Shader compilation is estimated at about 10 minutes on most PCs. 2K advises playing for at least 15 minutes after graphics changes before judging performance.
- If shader compilation takes far longer than expected, restart. 2K suggests rebooting the game and PC; its guide also explains how to clear the shader cache for NVIDIA and AMD. Clearing the cache may affect shaders used by other programs.
- Compare frame consistency, not just average FPS. Note whether the problem is a low average, uneven frame delivery, or stutter in particular areas before changing more settings.
When do graphics settings stop helping?
A GPU-bound problem can often respond to lower detail or a more performance-oriented upscaler. But not every hitch is caused by graphics quality. PC Gamer reported that its minimum-spec-class CPU reached full utilization in large outdoor areas, and that lowering graphics or increasing upscaling did not eliminate outdoor stutters. If frame delivery is still uneven after a reasonable graphics adjustment, CPU saturation or a game-side issue may be involved; the available tests do not establish a universal fix.
No reviewed source establishes a controlled, current-build ranking of the FPS cost of every individual setting. Make incremental changes and judge them in play rather than assuming one option is always the most expensive.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
