Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallbluedelay vst.dll is a legacy audio plug-in file from the BlueLine suite, not a Windows system component. The safest fix is to restore the original BlueLine installation or a trusted backup, place the file in the VST folder used by your DAW, and rescan that folder.
What this file actually does
bluedelay vst.dll is associated with BlueDelay, a delay effect in the legacy BlueLine suite from digilogue digital recording hard & software. The suite contained several DirectX and VST effects, including delay, chorus, flanger, phaser, compressor, gate, equalizer, filter, reverb and multitap effects.
As an Amazon Associate I earn from qualifying purchases.
The .dll filename is consistent with a Windows VST2 plug-in. Your digital audio workstation, or DAW, loads the plug-in from a configured VST directory. Windows does not normally load this file as part of the operating system.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →That distinction matters. Do not copy bluedelay vst.dll into C:WindowsSystem32 or C:WindowsSysWOW64, and do not treat it like a missing Windows runtime. The correct location is the VST2 plug-in folder scanned by the host that uses BlueDelay.
#1 Best Overall
- Pro performance with great pre-amps - Achieve a brighter recording thanks to the high performing mic pre-amps of the Scarlett 3rd Gen. A switchable Air mode will add extra clarity to your acoustic instruments when recording with your Solo 3rd Gen
- Get the perfect guitar and vocal take with - With two high-headroom instrument inputs to plug in your guitar or bass so that they shine through. Capture your voice and instruments without any unwanted clipping or distortion thanks to our Gain Halos
- Studio quality recording for your music & podcasts - Achieve pro sounding recordings with Scarlett 3rd Gen’s high-performance converters enabling you to record and mix at up to 24-bit/192kHz. Your recordings will retain all of their sonic qualities
- Low-noise for crystal clear listening - 2 low-noise balanced outputs provide clean audio playback with 3rd Gen. Hear all the nuances of your tracks or music from Spotify, Apple & Amazon Music. Plug-in headphones for private listening in high-fidelity
- Everything in the box: Includes Pro Tools Intro+, Ableton Live Lite, Cubase LE, and Hitmaker Expansion: a suite of essential effects, powerful software instruments, and easy-to-use mastering tools
The host could be any DAW or VST-compatible application that previously loaded BlueDelay. No specific application can be identified from the filename alone.
Cause-by-symptom guide
| What you see | Most likely cause | Best next step |
|---|---|---|
The DAW says bluedelay vst.dll is missing |
BlueLine was removed, moved, or incompletely installed | Restore or reinstall BlueLine |
| BlueDelay disappeared after an antivirus alert | Defender or another antivirus quarantined the file | Inspect Protection history and verify its source |
| The file exists, but the DAW cannot find it | The host scans a different VST folder | Add the correct folder to the DAW’s VST2 paths |
| The DAW finds it but rejects it | Wrong architecture, old plug-in format, or missing dependency | Check the host architecture and scan details |
| Only one DAW reports the problem | A stale plug-in cache or host configuration issue | Clear the failed plug-in cache and rescan |
| Several unrelated programs report DLL errors | Possible Windows component corruption | Run DISM, then SFC |
The error names MSVCP*.dll or VCRUNTIME*.dll |
A Microsoft Visual C++ dependency may be missing | Install the matching Microsoft redistributable |
regsvr32 reports no entry point |
The file is being treated like a COM component | Stop using registration commands; configure the VST path instead |
Fix 1: Restore BlueLine from a trusted source
This is the most likely and most reliable solution because bluedelay vst.dll belongs to the BlueLine application package.
The original Digilogue download address is referenced by historical material, but a currently available official Digilogue download could not be confirmed. Use an original installer you already possess, a known-good backup, or an installation source supplied directly by the developer. Do not substitute an isolated DLL from an unknown source.
Check whether BlueLine is still installed
- Press
Windowsand type Installed apps. - Open Installed apps.
- Search for BlueLine, BlueDelay, or digilogue.
- If an entry appears, select its three-dot menu.
- Choose Uninstall only if you have the original installer or a confirmed backup ready. Older plug-ins often do not provide a useful modern repair button.
- Restart Windows.
- Run the original BlueLine installer.
- If the installer asks for a destination, choose the VST2 folder used by your DAW. If you are unsure, install to the location used by the original setup rather than creating several new copies.
- Complete the installation and restart the DAW.
If the installer provides separate DirectX and VST choices, select the VST option for use in a modern plug-in list. DirectX support varies between hosts and should not be assumed.
Confirm that the file was restored
- Open File Explorer.
- Search the folders you use for audio plug-ins for
bluedelay vst.dll. - Right-click the result and choose Show more options if needed.
- Select Properties.
- Check the Location field.
- Confirm that the folder is a VST plug-in directory, not a Windows system directory.
- Do not rely on catalogue-reported version, size, or hash details as proof of authenticity. Those details are not verified by the original vendor.
If the file is present in the correct folder, continue with the DAW rescan below.
If you only have a backup copy
Manual copying is acceptable only when the backup came from your own known-good BlueLine installation or a verified installer.
- Copy the complete BlueLine plug-in set if the backup contains it, rather than copying an unexplained DLL by itself.
- Paste it into the VST2 folder that your DAW scans.
- Do not overwrite a newer, verified installation without first preserving the existing files.
- Run the DAW’s full plug-in rescan.
- Check whether BlueDelay appears and opens.
If the backup file triggers a security warning, stop and verify its provenance before allowing it.
Fix 2: Check Microsoft Defender quarantine
An old plug-in can be quarantined during a scan even when the original problem is simply that the DAW cannot load it. Do not restore the file automatically. First confirm that it came from your original BlueLine installer or a trusted backup.
Rank #2
- The new generation of the songwriter's interface: Plug in your mic and guitar and let Scarlett Solo 4th Gen bring big studio sound to wherever you make music
- Studio-quality sound: With a huge 120dB dynamic range, the newest generation of Scarlett uses the same converters as Focusrite’s flagship interfaces, found in the world's biggest studios
- Find your signature sound: Scarlett 4th Gen's improved Air mode lifts vocals and guitars to the front of the mix, adding musical presence and rich harmonic drive to your recordings
- All you need to record, mix and master your music: Includes industry-leading recording software and a full collection of record-making plugins
- Everything in the box: Includes Pro Tools Intro+, Ableton Live Lite, Cubase LE, and Hitmaker Expansion: a suite of essential effects, powerful software instruments, and easy-to-use mastering tools
Inspect Protection history
- Open Start and select Settings.
- Choose Privacy & security.
- Select Windows Security.
- Open Virus & threat protection.
- Under Current threats, select Protection history.
- Look for an event involving
bluedelay vst.dll, BlueLine, or the folder where your plug-ins are stored. - Open the event and read the detection name, file path, and action taken.
- If the path is unexpected, the detection is severe, or you cannot verify the file’s source, leave it quarantined.
- If the file came from your original installer and you have independently checked that installer, use the available restore or allow action only after reviewing Microsoft’s warning about allowing files that may be unsafe.
After restoration, place the file in the intended VST folder if Defender restored it elsewhere. Then rescan the folder in your DAW.
If Defender repeatedly removes the file, do not keep restoring it blindly. Obtain a clean, legitimate BlueLine installer or retire the obsolete plug-in.
Fix 3: Correct the DAW’s VST2 folder and rescan
A reinstall can appear unsuccessful when the DAW is scanning a different directory.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Find the file’s actual folder
- Open File Explorer.
- Search for
bluedelay vst.dll. - Right-click the result and choose Open file location.
- Copy or note the folder path shown in the address bar.
- Confirm that the file is not inside
System32,SysWOW64, a temporary folder, or an unrelated application directory.
Add the folder to the DAW
Every host uses different menus, but the relevant setting is usually named Plug-in folders, VST paths, VST2 locations, or Plug-in manager.
- Open the DAW.
- Open its Preferences, Settings, or Options window.
- Find the plug-in or VST section.
- Add the folder containing
bluedelay vst.dllto the VST2 search paths. - Save the setting.
- Choose Rescan, Rescan plug-ins, Scan all, or an equivalent command.
- If available, choose a full rescan rather than a quick scan.
- Close and reopen the DAW.
- Insert BlueDelay on an audio track or open the host’s plug-in browser and search for BlueDelay.
A successful result is the plug-in appearing in the host’s VST effects list and opening without a missing-file message.
If the DAW still does not list it
The host may have cached a previous failed scan.
- Open the DAW’s plug-in manager.
- Look for Reset, Clear failed plug-ins, Remove blacklist, or Rescan all.
- Clear the failed entry for BlueDelay.
- Run a complete rescan.
- Restart the DAW.
Do not install several copies into multiple folders just to make the host find one. That can create duplicate entries and make future troubleshooting harder.
Fix 4: Check architecture and plug-in age
The architecture of BlueLine is not authoritatively verified. Do not assume that the file is 32-bit or 64-bit based only on its age or filename.
Free tools Windows power users keep installed
One-click scans. No signup required.
A legacy plug-in may be rejected because:
- The DAW is 64-bit only and the plug-in is 32-bit.
- The host and plug-in architectures do not match.
- The plug-in format is too old for the host.
- A compatibility bridge is required but missing.
- The host blocks the plug-in after a failed scan.
Check your DAW’s documentation or About window for its architecture. If the host supports only 64-bit VST plug-ins and BlueDelay is a 32-bit binary, use a compatible host or a reputable compatibility bridge that supports your setup. If the plug-in is not supported, replacing it with a maintained delay effect may be safer than forcing it to load.
Rank #3
- PLUG IN AND HEAR SOUND IN SECONDS - USB Type-A connector with a 3.5mm stereo headphone output and a separate 3.5mm mono microphone input. No drivers, no software, no external power - the adapter is USB bus-powered and is recognized as a standard USB audio device.
- WORKS ON WINDOWS, MAC AND LINUX - Driverless on Windows 98SE/ME/2000/XP/Server 2003/Vista/7/8, Linux and Mac OSX, and compliant with the USB Audio Device Class 1.0 specification, so any system that supports class-compliant USB audio will see it. Select it as the sound output and input device after plugging it in.
- TWO JACKS, TWO JOBS - The green jack is stereo OUT for headphones or powered speakers; the pink jack is mono microphone IN for a 3.5mm mic. It does NOT support 4-pole headsets on a single combo plug, it does NOT power passive speakers, and it does NOT add surround sound - it is a stereo 2-channel adapter.
- FOR LAPTOPS AND DESKTOPS THAT NEED AN AUDIO PORT BACK - Adds a headphone and mic port to a laptop, desktop, or mini PC whose onboard jack has failed or was never there. Managed and work-issued computers can block new USB audio devices by policy - check with your IT department before ordering for a company machine.
- SABRENT SUPPORT AND WARRANTY - What is in the box: one USB audio sound adapter. Backed by a 1-year limited warranty, extended to 2 years when you register within 90 days on the manufacturer's website.
If the host reports a specific dependency rather than an architecture problem, continue to the runtime section.
Fix 5: Repair a named Microsoft runtime dependency
A Microsoft Visual C++ Redistributable will not recreate bluedelay vst.dll. It is relevant only when the error also names a dependency such as MSVCP*.dll or VCRUNTIME*.dll.
Use Microsoft’s official Visual C++ Redistributable downloads.
- Read the exact error message shown by the DAW.
- If it names an
MSVCPorVCRUNTIMEfile, open Microsoft’s redistributable page. - Download the package architecture that matches the application, not merely the operating system.
- For a 32-bit DAW on 64-bit Windows, the x86 package may be required.
- Run the downloaded installer.
- Choose Repair if it is already installed, or install it if it is absent.
- Restart Windows.
- Rescan the VST2 folder in the DAW.
Multiple Visual C++ Redistributables can coexist. Do not remove older packages at random, because another application may depend on them.
Fix 6: Repair Windows components only when broader symptoms exist
Because bluedelay vst.dll is a third-party plug-in, Windows component repair is unlikely to restore it. Use this step when several unrelated applications report damaged or missing Windows files, or when Windows itself is behaving incorrectly.
Run DISM
- Open Start.
- Type Command Prompt.
- Right-click Command Prompt.
- Select Run as administrator.
- Approve the User Account Control prompt.
- Enter:
DISM /Online /Cleanup-Image /RestoreHealth
- Press
Enter. - Wait for the operation to finish.
- Restart Windows if DISM reports that a restart is required.
Run System File Checker
Open an elevated Command Prompt again and enter:
sfc /scannow
Press Enter and wait until verification reaches 100 percent. Restart Windows, then test the DAW again.
If DISM or SFC reports that it could not repair files, repeat the check after restarting and review the exact result. Do not expect these commands to download or replace the BlueLine plug-in itself.
If you are tired of hunting through Windows versions and repeating SFC or DISM without knowing what changed, Outbyte PC Repair can show a free scan of reported problems; repairs are performed by the full version, and reinstalling BlueLine remains the definitive fix for this application file.
Fix 7: Use System Restore after a recent change
System Restore can help if BlueDelay worked previously and disappeared after a recent installation, update, or system change. It will not reliably recreate a plug-in that was never included in a restore point.
Rank #4
- Podcast, Record, Live Stream, This Portable Audio Interface Covers it All - USB sound card for Mac or PC delivers 48kHz audio resolution for pristine recording every time
- Be ready for anything with this versatile M-AUDIO interface - Record guitar, vocals or line input signals with two combo XLR / Line / Instrument Inputs with phantom power
- Everything you Demand from an Audio Interface for Fuss-Free Monitoring - 1/4" headphone output and stereo 1/4" outputs for total monitoring flexibility; USB/Direct switch for zero latency monitoring
- Get the best out of your Microphones - M-Track Duo’s transparent Crystal Preamps guarantee optimal sound from all your microphones including condenser mics
- The MPC Production Experience - Includes MPC Beats Software complete with the essential production tools from Akai Professional
- Press
Windows+R. - Type:
rstrui.exe
- Press
Enter. - Select Next.
- Choose a restore point from before the problem began.
- Select Scan for affected programs if available.
- Review the changes.
- Select Next, then Finish.
- Allow Windows to restart.
After Windows returns, check the BlueLine installation and rescan the DAW. If the plug-in is still absent, restore it from the original installer or backup instead.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Driver checks: only for wider audio problems
A graphics or audio driver update is not a normal fix for a missing VST DLL. Consider drivers only if the DAW also crashes, audio devices disappear, playback fails, or several plug-ins show graphical or audio-device problems.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsCheck Device Manager
- Right-click Start.
- Select Device Manager.
- Expand Sound, video and game controllers.
- Right-click the audio device used by the DAW.
- Select Properties.
- Open the Driver tab.
- Review the provider, date, and status.
- Use Update Driver only when you have a trusted driver source or Windows has a suitable update.
- Restart Windows and test the DAW.
Do not uninstall a working audio driver merely because BlueDelay is missing. If the driver update introduces a new problem, return to the same Driver tab and use Roll Back Driver when available.
If identifying the correct audio, chipset, or interface driver requires hunting through hardware models and guessing which of several installed drivers is stale, Outbyte Driver Updater can show a free scan of driver issues; installation of updates is handled by the full version, but it is not a substitute for restoring BlueLine.
Why regsvr32 usually does not help
VST plug-ins are normally discovered and loaded by the DAW. They are not generally COM or ActiveX servers that must be registered in the Windows registry.
Do not use these commands as a routine fix:
regsvr32 "bluedelay vst.dll"
regsvr32 /i "bluedelay vst.dll"
Microsoft’s Regsvr32 guidance applies to DLLs that expose registration entry points such as DllRegisterServer. A VST plug-in may not expose that function. An error about a missing entry point confirms that registration is not the correct repair path.
Avoid isolated DLL downloads
Downloading bluedelay vst.dll from a random DLL download website is risky because the file may contain malware, be the wrong version, use the wrong architecture, or omit the other files BlueLine needs. Copying it into a Windows system folder often fails to fix the DAW because the host still scans a different VST directory.
Use these sources instead:
- The original BlueLine installer from a legitimate Digilogue source, when available.
- A known-good backup from your own system.
- A verified installer supplied by the original developer.
- Microsoft’s official redistributable page when the exact error names a Microsoft runtime dependency.
If no legitimate BlueLine installer or backup exists, the safest outcome may be to replace the obsolete effect with a maintained delay plug-in.
FAQ
Is bluedelay vst.dll a Windows file?
No. It is a third-party BlueLine plug-in file from digilogue digital recording hard & software. It does not belong in System32 or SysWOW64.
Best Value
- The new generation of the artist's interface: Connect your mic to Scarlett's 4th Gen mic pres. Plug in your guitar. Fire up the included software. Start making your first big hit
- Studio-quality sound: With a huge 120dB dynamic range, the newest generation of Scarlett uses the same converters as Focusrite’s flagship interfaces, found in the world's biggest studios
- Never lose a great take: Scarlett 4th Gen's Auto Gain sets the perfect level for your mic or guitar, and Clip Safe prevents clipping, so you can focus on the music
- Find your signature sound: Air mode lifts vocals and guitars to the front of the mix, adding musical presence and rich harmonic drive to your recordings
- With Scarlett 4th Gen, you have all you need to record, mix and master your music: Includes industry-leading recording software and a full collection of record-making plugins
Where should bluedelay vst.dll be located?
It should be in the VST2 plug-in directory scanned by your DAW. The correct path depends on the host and the original BlueLine installation.
Recommended Free Tools
Can I copy the file into System32?
No. System32 and SysWOW64 are Windows system directories, not general-purpose plug-in folders. Copying the file there can create confusion and does not configure the DAW to load it.
Does the file need to be registered?
Normally no. Configure the DAW’s VST2 path and rescan it instead.
Is BlueLine 32-bit or 64-bit?
No authoritative public source confirms the architecture. Check the DAW’s scan report and documentation rather than guessing.
Why is the DLL present but still rejected?
The host may be incompatible with the plug-in’s architecture or age, may lack a dependency, or may have cached a previous failed scan. Clear the failed plug-in cache and run a full rescan.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Will repairing Visual C++ fix the missing file?
Only if the error also identifies a missing Visual C++ dependency. It will not recreate bluedelay vst.dll.
What information should I record if the problem continues?
Record the DAW name and version, Windows version, exact error text, plug-in folder, host architecture, and any antivirus detection name. Those details distinguish a missing file from a scan, architecture, or dependency failure.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
