First identify what “lagging” means: low frame rate or visual stuttering is a PC performance symptom, while high latency, failed joins, and disconnects are multiplayer symptoms. They need different checks. There is no universal fix established for Remnant: From the Ashes on PC, but the comparisons below can help narrow down where the problem occurs.
Identify the symptom before changing anything
Note exactly what happens and when. A brief hitch, persistently low frame rate, delayed actions in co-op, a failed attempt to join, and a session that disconnects are different problems. Also record whether the issue occurs in solo play, co-op, or both. The game supports solo play and online co-op with up to two other players, according to the official game page.
As an Amazon Associate I earn from qualifying purchases.
- Performance: the image slows down or hitches, including during solo play.
- Latency: co-op actions feel delayed, but the session stays connected.
- Failed join: you cannot enter a friend’s session.
- Disconnect: a session starts, then ends unexpectedly.
Write down whether a hitch is continuous or limited to particular scenes. For co-op, record the exact point a join fails or a disconnect occurs. These observations are useful for comparing sessions and for support.
Check your PC against the published requirements
Steam’s listing for the game gives the following PC requirements. They are published specifications, not a promise of a particular resolution, frame rate, or smooth performance.
#1 Best Overall
- Compatible with Windows and Android.
- 1000Hz Polling Rate (for 2.4G and wired connection)
- Hall Effect joysticks and Hall triggers. Wear-resistant metal joystick rings.
- Extra R4/L4 bumpers. Custom button mapping without using software. Turbo function.
- Refined bumpers and D-pad. Light but tactile.
| Component | Minimum | Recommended |
|---|---|---|
| Operating system | 64-bit Windows 7/8/10 | 64-bit Windows 7/8/10 |
| Processor | Intel Core i3-7350K or better | Intel Core i5-4590 or better |
| Memory | 8 GB RAM | 8 GB RAM |
| Graphics | AMD Radeon RX 470 | Nvidia GeForce GTX 970 |
| DirectX | Version 11 | Version 11 |
Compare your CPU, memory, graphics card, operating system, and DirectX support with the Steam listing. Meeting a listed requirement does not establish that the game should run at a specific frame rate; the listing does not state a resolution or FPS target. Steam also says its client supports Windows 10 and later beginning January 1, 2024. That client-support note is separate from the game’s published operating-system requirements.
For low frame rate or stuttering
These are general PC troubleshooting comparisons, not fixes documented specifically for this game by the official pages cited here.
Rank #2
- Supported Multi-Platform:Switch/Switch 2 (NO support wake-up function)/iOS/Android/Windows PC (Notice:Not compatible with Xbox, PlayStation or GeForce Now, For game platforms not mentioned, please consult customer service before buying）
- Connection modes:Wired/Bluetooth/Wireless Dongle(Connect to PC via Bluetooth : Select iOS (phone) mode, but it's not recommended; Dongle is more stable)
- 【Innovative Intelligent Interactive Screen】Manba One V2 wireless game controllers create a new era of controller screens; Equipped with a 2-inch display, no App & software needed, you can set the pc controller directly through the screen visualization, More convenient operation
- 【Micro Switch Button】Manba One wireless controller has Micro Switch Button and ALPS Bumper; The 6-axis gyroscope function makes switch games more immersive
- 【Customize Your Own Controller】The intelligent interactive screen allows you to easily set vibrations, buttons, joysticks,lights, etc., without the need for complex key combinations; 4 configurations can be saved to unlock your own gameplay for different games; The 4 back keys support macro definition settings, and you can activate the set character's ultimate move with one click
- Compare your PC with the requirements above. If a component is below the minimum specification, note that when assessing performance; do not assume a hardware upgrade is necessary without identifying a specific limitation.
- Close background workloads for a controlled comparison. Run the game once with unnecessary applications closed, then check whether the same scene still hitches. This can help determine whether other activity coincides with the symptom, but it is not a guaranteed remedy.
- Note where and how often the hitch happens. Record whether it is continuous, repeats in particular scenes, or appears only during co-op. That distinction helps avoid treating a rendering issue as a network issue.
- Compare solo and co-op play. If the problem occurs in solo play too, note that; if it appears only in co-op, record that instead. Neither result alone identifies a cause.
For multiplayer lag, failed joins, or disconnects
The official product page confirms online co-op support, but the reviewed official sources do not establish the game’s network topology, a known Wi-Fi defect, or a universal repair for multiplayer problems.
- Label the symptom precisely. Note whether actions are delayed, the join attempt fails, or a connected session disconnects. Include when it happens and whether solo play is unaffected.
- Compare with a different host. Try a co-op session hosted by another player, if possible, and record whether the symptom changes. A different result is useful evidence, but does not by itself prove where the cause lies.
- If you use Wi-Fi, optionally compare with a wired session. A wired connection can help test whether the local wireless connection may be contributing. It is not a guaranteed fix, and a wired test cannot rule out the host, internet service provider, or game service.
- Keep the comparisons separate. Note whether changing hosts or using a wired connection changes latency, joining, or disconnect behavior. These checks help describe the issue; no single comparison identifies the root cause on its own.
What to send support if it continues
Steam’s game technical issue page links to official support and community resources. If basic comparisons do not resolve the issue, include concise details that let support distinguish performance trouble from a co-op connection problem.
Rank #3
- Tri-mode Connectivity: Wired for Xbox, 2.4G & Wired for PC, and Bluetooth for Android. The G7 Pro supports seamless connectivity across Xbox, PC, and Android. Effortlessly switch between modes using the convenient physical mode switch.
- TMR Sticks: The G7 Pro features GameSir's Mag-Res TMR sticks, combining Hall Effect durability with traditional potentiometer performance. This advanced technology delivers stable polling rates for smooth, drift-free gaming with low power consumption.
- Hall Effect Analog Triggers: The GameSir precision-tuned Hall Effect analog triggers provide unmatched smoothness and linear input for precise control. Featuring clicky Micro Switch trigger stops, gamers can easily switch based on their preferences.
- 1000Hz Polling Rate on PC: Experience ultra-responsive gaming with a 1000Hz polling rate on PC, available through both wired and 2.4G wireless connections. This ensures instantaneous input registration, reducing lag and optimizing your performance for the most competitive gameplay.
- GameSir Nexus App: The G7 Pro is compatible with the upgraded GameSir Nexus app, which brings a significant upgrade over the original. It introduces powerful new features such as gyro settings, stick curve adjustments, and button-to-mouse mapping, giving you deeper customization and more control than ever before.
- Your PC specifications, including CPU, RAM, and graphics card.
- The platform or storefront where you play.
- The exact symptom: stuttering, latency, failed join, or disconnect.
- When it began, whether solo play is affected, and whether it occurs in specific scenes.
- For co-op, whether the result changed with a different host or a wired connection instead of Wi-Fi.
Use the official support route rather than deleting saves, changing undocumented configuration, disabling security protections, or relying on third-party “boosters”; the official sources cited here do not establish those as appropriate fixes.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Do not apply sequel fixes by assumption
Remnant II is a separate game. Its patch notes and fixes are not evidence that the same change applies to Remnant: From the Ashes. Use documentation that specifically names the first game before applying game-specific advice.
Quick Recap
Best Value
- Platform Compatibility: This PC controller is designed for Windows PC, Steam, Switch, Android, and iOS. Xbox-style asymmetric stick layout for PC gamers. Three modes cover all your devices. Please check your device compatibility before purchase
- Three Connection Modes: 2.4G wireless, Bluetooth, wired USB-C. PC gets native XInput/DirectInput. Switch pairs via Bluetooth, no adapter. This gaming PC controller switches devices seamlessly. Stable wireless minimizes random disconnects during gaming
- Hall Effect Precision: Hall effect joysticks and triggers eliminate stick drift. This gaming controller for PC delivers smooth, responsive input with no dead zones. Built for FPS, racing, and action games. Long-term precision for competitive PC gaming
- Back Buttons & Battery: Two programmable back buttons map combos and shortcuts. Textured grips with dual vibration. 1000mAh battery delivers up to 20H playtime. RGB can be turned off. A solid PC controller for gaming with custom back buttons
- ABXY Layout Switch: Press B + Minus + Plus to swap between PC and Switch modes. Features: 1000Hz polling rate, RGB lighting, turbo. Note: designed without mic jack or gyro sensor
Rank #4
- Multi-Platform PC Gaming Controller: Working with Switch, PC, Android, and iOS devices via Bluetooth, wired, and wireless dongle connections.
- Hall Effect Joysticks: Delivering enhanced recentering performance for smoother control and superior anti-drift capability. Plus, with anti-friction rings.
- 2-Way Trigger Lock: With trigger stops, gamers can toggle between short and long pull positions. Additionally, gamers can activate hair trigger mode by pressing M+LT/RT (triggers must be in the long pull position).
- 1000Hz Polling Rate: This ensures that your inputs are registered almost instantaneously, minimizing lag and maximizing your performance during competitive play.
- Mechanical Circular D-pad: Designed for quick reactions and accuracy in every direction, this D-pad elevates your gaming experience with superior responsiveness.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
