The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →To loop a pre-recorded video on YouTube Live, play it through an encoder such as OBS Studio and enable the source’s loop setting. For a seamless repeat, the video’s ending must already match its beginning: OBS repeats the file but does not blend or repair the transition.
Make the video seamless before you stream it
A loop setting restarts playback at the end of the file. It cannot hide a jump in the picture, a flash, a pause, a sudden change in sound, or an audio click. Check the precise end-to-start boundary in an editor or preview the file on repeat. If it does not flow naturally, edit the media—such as by adjusting the in and out points or adding an appropriate audio crossfade—before sending it to YouTube. OBS’s loop control restarts the source; it does not create a transition. OBS documents the source’s restart behavior.
Loop one video in OBS
- Add the source: In OBS, select the scene where the video should play, add a Media Source, and choose the local video file. OBS lists common supported formats including MP4, MOV, MKV, AVI, and WebM. The OBS Media Sources guide was published January 11, 2022.
- Enable repetition: Open the Media Source properties and check Loop. Preview playback through the end and back to the start; fix any visible or audible discontinuity in the file rather than expecting the checkbox to smooth it.
- Set up YouTube: In YouTube Studio, open Create → Go Live and create or select a stream. In the Live Control Room, copy the server URL and stream key into OBS’s streaming settings. Treat the key as a password: anyone who has it may be able to send an encoder feed to your stream. Follow YouTube’s encoder setup guide.
- Start and check the feed: Start streaming in OBS, then inspect the Live Control Room preview and stream health. Depending on the stream setup, you may need to verify the preview and click Go live in the Control Room before viewers can watch.
Loop a playlist instead of one file
For a sequence of recordings, add a VLC Video source in OBS, set up the playlist, and enable Loop Playlist. VLC must be installed for this OBS source; use 64-bit VLC with 64-bit OBS. Check the playlist order and each file’s opening and ending, since a seamless individual file does not guarantee a smooth transition to the next one. The OBS Media Sources guide explains that the VLC source restarts after its playlist runs out.
Choose stream settings that match your video and connection
Use an output resolution and frame rate that suit both the source file and the computer encoding it. YouTube’s recommended bitrate depends on resolution, frame rate, and codec, so use the matching row in its live encoder settings and bitrate recommendations rather than applying one bitrate to every stream.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- YouTube recommends RTMP or RTMPS ingest, constant bitrate (CBR), and a keyframe interval of two seconds; it says not to exceed four seconds. These are YouTube platform recommendations in its encoder-settings guidance.
- Make sure the internet connection can sustain the selected bitrate throughout the stream. YouTube’s streaming tips recommend keeping upload capacity 20% above the stream’s bitrate as headroom.
- Test with representative movement and audio. Confirm that the preview is stable, sound is present, the stream-health status is acceptable, and the repeated boundary remains clean.
Test privately and handle the broadcast deliberately
- Before a public broadcast, send a private or unlisted test and check picture, sound, stream health, and at least one end-to-start repeat.
- Monitor the Live Control Room’s preview, health indicators, and messages during the broadcast; a successful start does not guarantee a stable feed for its full duration.
- When finished, stop the broadcast in YouTube and stop the encoder feed. YouTube’s encoder guide says streams under 12 hours are automatically archived; check YouTube’s current help guidance if the archive duration matters to your plan.
Copyright and YouTube live-stream rules
YouTube says, “All live streams are scanned for matches to third-party content, including copyrighted content in the form of another live broadcast.” A stream can be interrupted when a match is detected. Having a licence does not necessarily prevent that interruption: the rights owner may need to add your channel to its Content ID allowlist. Read YouTube’s guidance on copyright issues with live streams and confirm the applicable permissions and allowlisting with the rights owner before broadcasting.
Rights to use a recording and permission to use its music or other included material are separate practical checks; make sure your intended live use is covered. Repeating a recording does not change its copyright status. YouTube’s live-streaming overview lists Gyre as a cloud-based option for 24/7 pre-recorded streams; that listing alone does not establish a service’s current price, terms, or performance.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Troubleshooting looped YouTube Live video
- The picture jumps or flashes at the repeat: The file’s last and first frames do not join cleanly. Adjust the edit or choose a better loop point, then preview the boundary again.
- The audio clicks, cuts out, or goes silent: Inspect the audio at both ends of the file. Edit the boundary or use a suitable crossfade, then listen to the repeat before streaming.
- The VLC Video source is missing: Install VLC and make sure its architecture matches OBS (64-bit VLC with 64-bit OBS).
- The preview does not appear in YouTube: Check that OBS is sending to the correct server URL and that the intended stream key is entered. Keep the key private, and review YouTube’s preview and stream-health messages.
- The stream buffers or loses health: Check the selected bitrate against YouTube’s recommendations and the connection’s sustained upload capacity. Leave the 20% headroom recommended by YouTube’s streaming tips, and test again.
- A copyright match interrupts the live feed: Check YouTube’s notice and contact the rights owner about permissions and Content ID allowlisting; a licence alone may not prevent a live interruption.
- The stream stops when the computer or connection stops: A local OBS stream relies on the computer, encoder, and internet connection continuing to send the feed. For unattended operation, consider cloud playout instead.
Or let it run in the cloud
For a YouTube channel that should keep looping pre-recorded video without leaving a computer and home connection running, StreamNeo runs the stream from the cloud. Upload a recording or build a playlist, add your YouTube stream key once, and go live. Each slot supports one always-on stream, 24/7 looping and playlists, 10 GB storage per slot pooled across active slots, and automatic recovery if YouTube drops the stream. The uploaded video streams as made, up to 4K 60fps, at one flat price per slot rather than quality-based tiers. The first day is free with no card, once per account; the same product is available on daily, weekly, monthly, six-month, or yearly billing, cancellable any time. UPI and cards are accepted in India; card checkout is available worldwide. For five or more slots, contact support.
Monthly billing is $9.99 per month. Start your free first day with StreamNeo.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchQuick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
