Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →To loop a language-learning podcast playlist on YouTube Live, use OBS Studio’s VLC Video source: load the episode files in order, enable Loop Playlist, then send the encoder feed to a YouTube stream created in Live Control Room. The loop repeats the files, but it cannot keep a local computer, encoder, internet connection, or YouTube ingest running indefinitely on its own. Confirm your rebroadcast rights and test the full setup before scheduling a long broadcast.
Before you set up the broadcast
- Enable live streaming early. YouTube requires a verified channel with no live-streaming restrictions in the previous 90 days. First-time activation can take up to 24 hours, so enable it well before the broadcast. YouTube live streaming tips
- Collect the episode files. Put the recordings you intend to broadcast somewhere OBS can access them, and decide their playback order. For a playlist of multiple files, OBS’s VLC Video source is the direct fit.
- Check rebroadcast and archive rights. Access to a show, an RSS feed, or permission to listen does not establish permission to stream or archive it. Confirm the rights for every episode, including any music and the resulting archive.
- Allow time to test. YouTube recommends checking the preview and monitoring audio and video quality before and during the stream.
Set up a looping podcast playlist in OBS
- Install VLC. OBS requires VLC to be installed for its VLC Video source. Use the OBS documentation’s Media Sources guidance if you need to check the source requirements.
- Add a VLC Video source. In OBS, add a VLC Video source to the scene you will broadcast. Open its properties and add the podcast episode files in the intended order.
- Enable the loop. Turn on Loop Playlist in the VLC Video source properties. When the final episode ends, OBS starts the playlist again. If you only need to repeat one local file, OBS’s regular Media Source has a separate Loop setting.
- Check playback in OBS. Start the playlist and confirm that the picture and sound behave as intended. Check the transitions between files as well as the beginning of the playlist; a correctly ordered list is important for a language lesson series.
Looping governs what happens when the media files finish; it does not restart OBS if the computer shuts down, restore a lost network connection, or guarantee YouTube ingest remains available.
Connect OBS to YouTube Live
- Create or schedule an encoder stream. In YouTube Studio, open Live Control Room and create a stream or schedule one. YouTube documents scheduling, reusing settings, auto-start/auto-stop, and DVR controls as stream-management options; scheduling by itself does not make the broadcast repeat indefinitely. See Manage live stream settings.
- Copy the connection details. YouTube provides a stream URL and stream key for the encoder connection. In OBS, open Settings > Stream, select YouTube as the service if available, and enter the details as required by the selected connection method. Treat the stream key like a password: anyone who has it may be able to send a feed to your stream.
- Start the encoder and inspect the preview. Start streaming from OBS, then check the incoming preview in Live Control Room. Confirm that the playlist is playing and that viewers can hear the intended audio.
- Start the YouTube broadcast when ready. Once the preview is correct and the scheduled stream is ready, start the live broadcast from YouTube if required by your stream settings. Monitor the stream rather than assuming the initial connection will last for the whole playlist.
For current YouTube encoder setup and connection instructions, see Create a YouTube live stream with an encoder. YouTube recommends monitoring the stream and checking its audio and video quality; see YouTube live streaming tips.
Protect the stream from copyright interruptions
YouTube scans live streams for third-party content matches. A match can replace the live picture with a placeholder; if the issue continues, YouTube may interrupt or terminate the stream. Even if you have a licence for third-party material, the rights holder may need to allowlist your channel through Content ID to avoid interruptions. Details are in Copyright issues with live streams.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
YouTube’s livestream terms state: “You represent and warrant that you have all necessary rights for the exploitation of the Live Content on the Google Services throughout the world, including, without limitation, music licensing rights from artists, record labels, publishers (including public performance licenses) and any other royalty participants.” Read the livestream terms and conditions and get permission from the relevant rights holders where necessary. Educational subject matter or public availability does not make an episode automatically safe to rebroadcast.
Plan for long broadcasts and archives
YouTube says encoder streams under 12 hours are automatically archived. That statement does not establish how a continuous event longer than 12 hours will be archived or divided, so do not promise a particular archive outcome for a longer broadcast. If an archive matters, plan a stream duration within the stated threshold or separately arrange and verify a recording workflow before going live. The loop in OBS can continue playing files, but the archive behavior is a separate YouTube consideration.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Troubleshoot common problems
| Symptom | Likely cause | What to check |
|---|---|---|
| VLC Video source is missing or will not load | VLC is not installed, or OBS cannot access the media files. | Install VLC, restart OBS if needed, and confirm that the episode files are available at the locations listed in the source. |
| The playlist stops after the last episode | Loop Playlist is not enabled. | Open the VLC Video source properties and enable the playlist loop option. |
| YouTube receives no encoder feed | The stream URL or stream key may be incorrect, or the encoder has not started. | Compare OBS’s stream settings with the current details in Live Control Room and start the encoder again. Keep the stream key private. |
| The preview appears, but the YouTube broadcast has not begun | The stream may still need to be started in Live Control Room, depending on its settings. | Check the stream’s status and start the broadcast when the preview is correct and the scheduled stream is ready. |
| The stream is interrupted or shows a placeholder | YouTube may have detected third-party material, or the relevant channel may not be allowlisted despite a licence. | Review YouTube’s copyright notice, confirm the permissions and music rights, and contact the rights holder about Content ID allowlisting where appropriate. |
| The broadcast ends unexpectedly | A loop setting does not protect the computer, OBS, network connection, or YouTube ingest from failure. | Check the computer and connection, review OBS and Live Control Room status, and restart the encoder or broadcast if needed. For an extended run, monitor it rather than relying on the playlist loop alone. |
Or let it run in the cloud
If you want the podcast playlist to keep streaming without leaving a home computer on, StreamNeo runs uploaded videos as a continuous YouTube stream from the cloud. Upload the recording or build a playlist, add your YouTube stream key, and go live. Nothing has to stay on at home; the uploaded video streams as made, up to 4K 60fps at one price per slot, and StreamNeo automatically recovers if YouTube drops the stream. The first day is free with no card. Monthly: $9.99 per month. Start a free day on StreamNeo.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problems
