With the headset powered on and connected to an audio source, double-press the physical Razer SmartSwitch button. The Barracuda V2 Pro changes between its USB Type-C HyperSpeed Wireless 2.4 GHz connection and Bluetooth. A green LED indicates HyperSpeed, blue indicates Bluetooth, and white means both connections are present while HyperSpeed has priority.
What the SmartSwitch changes
The Barracuda V2 Pro has two wireless paths:
- HyperSpeed Wireless: the 2.4 GHz connection supplied by the headset’s USB Type-C wireless dongle.
- Bluetooth: the alternate wireless audio connection to a paired Bluetooth device.
The SmartSwitch button is the physical control that selects which path carries audio. It does not create a new pairing each time you press it. In Bluetooth mode, the headset first attempts to reconnect to the last Bluetooth device it knows. If no known Bluetooth device is available, it enters pairing mode instead.
As an Amazon Associate I earn from qualifying purchases.
The official support record identifies this headset family as RZ04-03780. These instructions apply to the Barracuda V2 Pro controls described for that model family.
Switch from the USB dongle to Bluetooth
- Power on the headset. The mode toggle is available while the headset is powered on.
- Connect the headset to an audio source. Razer’s instruction specifies that the headset must be powered on and connected to an audio source before switching.
- Double-press the SmartSwitch button. The headset toggles from the USB Type-C HyperSpeed Wireless dongle to the Bluetooth audio source.
- Check the LED. Blue confirms Bluetooth mode. If a previously used Bluetooth device is available, the headset attempts to reconnect to it. If no known device is found, pairing mode activates so you can select the headset from the Bluetooth device’s connection controls.
Razer describes the control this way in the Barracuda Pro Master Guide: “When powered on and connected to any audio source, double press the Razer SmartSwitch button to switch between the USB Type C wireless dongle and Bluetooth audio source or vice versa.”
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Switch back from Bluetooth to USB wireless
- Leave the headset powered on and connected to an audio source.
- Double-press the SmartSwitch button again.
- Wait for the LED to show green, which indicates HyperSpeed Wireless 2.4 GHz mode.
- Audio is now routed through the USB Type-C wireless dongle rather than the Bluetooth source.
The same double-press action works in either direction; you do not need a separate button combination for the return trip.
Use the LEDs to identify the active connection
| LED color | What it means | What to do |
|---|---|---|
| Green | HyperSpeed Wireless 2.4 GHz mode is active. | Audio is using the USB Type-C wireless dongle. |
| Blue | Bluetooth mode is active. | Audio is using the selected Bluetooth source, or the headset is handling Bluetooth reconnection or pairing. |
| White | Both connections are present, with HyperSpeed Wireless 2.4 GHz prioritized. | Double-press SmartSwitch if you want Bluetooth to take over. |
The white state is important because it does not mean Bluetooth is the active audio path. It means both links are available, but the dongle connection has priority.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Why plugging in the dongle sends the headset back to 2.4 GHz
Razer treats insertion of the wireless dongle as an indication that you intend to use the dongle. Consequently, HyperSpeed Wireless receives priority when the dongle is connected. Depending on the connection state, the LED can show green for active HyperSpeed mode or white when Bluetooth is also present.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →This behavior is intentional rather than a failure to remember your Bluetooth selection. To use Bluetooth while the dongle remains plugged in, double-press SmartSwitch after the headset is powered on and connected to an audio source. You do not have to rely on unplugging the dongle to make the selection.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
USB wireless and Bluetooth compared
| Characteristic | HyperSpeed Wireless 2.4 GHz | Bluetooth |
|---|---|---|
| Connection method | USB Type-C wireless dongle | Bluetooth audio source |
| Active-mode LED | Green | Blue |
| Dongle required for that mode | Yes | No active use of the dongle is required |
| When both links are present | Prioritized; the LED is white when both connections are present | Available, but not prioritized until SmartSwitch selects it |
| Latency or responsiveness figures | No independent numeric measurement is published in the official material for this switching question | |
The practical choice is therefore determined first by which device you need to hear and whether the USB dongle is available. The official instructions explain the connection mechanisms but do not provide an independent latency test, a switching-time measurement, or a comparative range figure. Avoid treating the color change as a numerical performance rating.
Troubleshooting the most common switching problems
Double-pressing does nothing
- Confirm that the headset is powered on.
- Confirm that it is connected to an audio source. Razer’s procedure requires both conditions before the SmartSwitch toggle.
- Press the SmartSwitch button twice as a double press, rather than using a different control or a single press.
- Look for the LED change. Green, blue, or white tells you which connection state the headset reached.
The headset immediately favors the dongle
If the dongle is connected, this is expected. Razer assigns HyperSpeed priority when the dongle is inserted. Double-press SmartSwitch once the headset is powered on and connected to an audio source to select Bluetooth manually.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
The LED is white, but Bluetooth audio is not playing
White means both connections are present, not that Bluetooth is carrying the audio. HyperSpeed remains prioritized in this state. Double-press SmartSwitch and wait for blue. The headset then tries the last known Bluetooth device; if none is available, pairing mode activates.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
The LED is blue, but the intended Bluetooth device is not connected
Bluetooth mode reconnects to the last known Bluetooth device. If that device is unavailable, the headset enters pairing mode. Use the Bluetooth controls on the target audio device to select the headset when pairing mode is active.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
The headset returns to 2.4 GHz after reconnecting the dongle
Reconnecting the dongle deliberately restores its priority. This is the documented dongle-priority behavior, not evidence that the SmartSwitch control is broken. Select Bluetooth again with a double press if you want to keep using Bluetooth while the dongle remains connected.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.A reliable switching routine
For repeatable results, connect the audio source you want to use before pressing SmartSwitch, then use the LED as confirmation. Green means stop if you wanted USB wireless; blue means stop if you wanted Bluetooth; white means both links are present but HyperSpeed is still in control. If the headset cannot find a previously known Bluetooth device, complete a new Bluetooth pairing from the source device while pairing mode is active.
Quick Recap
Key points to remember
- One SmartSwitch action controls both directions: double-press to toggle between HyperSpeed Wireless and Bluetooth.
- The headset must be powered on and connected to an audio source for the documented toggle procedure.
- Green is HyperSpeed, blue is Bluetooth, and white means both are connected with HyperSpeed prioritized.
- Plugging in the USB Type-C dongle intentionally gives 2.4 GHz priority.
- No official independent numeric latency, switching-time, reliability, or range result is established for the two modes.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Recommended Free Tools
