For most handheld PCs, use Cyberpunk 2077’s built-in path: open Settings → Graphics, select AMD FidelityFX Super Resolution 3 in the resolution-scaling controls, then turn on the separate FSR Frame Generation option. The game will not expose usable FSR Frame Generation unless FSR 3 upscaling is enabled. CD PROJEKT RED recommends starting from a stable baseline of at least 60 FPS and using a display running at 120 Hz or higher; those are developer recommendations, not guarantees for every handheld.
Which frame-generation method should you use?
The correct method depends on the handheld’s GPU and operating system. The in-game FSR 3 route is the primary, documented setup for the PC version of Cyberpunk 2077. AMD Fluid Motion Frames (AFMF) is a separate driver feature configured in AMD Software: Adrenalin Edition, while NVIDIA DLSS Frame Generation is limited to supported GeForce RTX hardware.
As an Amazon Associate I earn from qualifying purchases.
| Method | Where it is enabled | Hardware and OS scope | Important prerequisite |
|---|---|---|---|
| FSR 3 Frame Generation | Cyberpunk 2077’s Graphics menu | PC version with the FSR 3 option; the official guidance does not define one universal handheld GPU list | FSR 3 upscaling must remain enabled |
| AMD AFMF | AMD Software: Adrenalin Edition, globally or per game | Eligible Radeon or Ryzen hardware on Windows 10 or Windows 11 | Adrenalin 25.3.1 or later and VSync disabled in both the driver and game |
| NVIDIA DLSS Frame Generation | Cyberpunk 2077’s DLSS controls | Supported GeForce RTX hardware | Patch notes identify RTX 40 and RTX 50 support for single Frame Generation; RTX 50 also supports Multi Frame Generation |
Do not treat these as interchangeable switches. FSR 3 is a game-level upscaler and frame-generation feature. AFMF operates at the driver level. DLSS Frame Generation is tied to NVIDIA hardware generations identified in the game’s patch notes.
Check your handheld before changing settings
Identify the operating system
Open the handheld’s system information and confirm whether it runs Windows 10 or 11, SteamOS, or another Linux distribution. Windows matters for AFMF because AMD’s published requirements name Windows 10 and Windows 11. The official material for this guide does not provide a universal SteamOS procedure for AFMF, so do not copy the Windows steps into SteamOS and assume they are supported.
#1 Best Overall
- BLUE LIGHT BLOCKING GLASSES: Our blue light glasses for women boast UV400 protection, blocking harmful blue rays from computer screens. With these bluelight glasses women, you can enjoy gaming, reading, or watching TV with no worries of eye strain.
- EYE RELIEF: Our blue light glasses are engineered to reduce blurry vision or strain caused by prolonged screen time. These womens blue light glasses aid in better sleep by preventing blue light from disrupting your natural sleep cycle, helping you fall asleep faster and enjoy a more restful night's sleep, making them the perfect christmas present.
- COMFORTABLE: Crafted from durable material, our trendy blue light glasses for woman or blue light glasses men ensure long-lasting comfort. The high-transmittance lenses accessories, gamer gifts for men, help keep your eyes relaxed. Perfect stocking stuffers, gifts for gamers men, christmas gifts for men, halloween costumes.
- LIGHTWEIGHT: These clear blue light glasses feature a lightweight frame, meaning they’ll stay comfy for long-term wear. Perfect as blue blockers glasses for women or mens blue light glasses, these non-prescription fake glasses for men can be worn throughout the day. The blue light blocking glasses women feature polycarbonate HD lenses, which are anti-reflective and restore true color.
- WORRY-FREE PURCHASE: If you experience any issues, our support team is ready to assist you quickly. These are the perfect costume glasses for cosplay dressing up.
Confirm the game version
FSR 3 with Frame Generation was added to the PC version in Patch 2.13, released September 12, 2024. Update the game before troubleshooting a missing option. Console editions are outside this setup because the cited feature addition was PC-only. If you are using an older installation or an offline build, check the title screen or launcher update history rather than assuming the menu must contain the newer control.
Check the display mode
Find the handheld’s active refresh rate in its display or quick-settings panel. CD PROJEKT RED advises a 120 Hz-or-higher display for Frame Generation. Many handhelds use 60 Hz panels, so the recommendation may not be achievable on your device; it is guidance for the display environment, not a promise that a higher reported frame count will look smooth everywhere. A frame counter can rise while the panel still refreshes at its normal limit, so evaluate the actual motion and pacing you see.
Measure a stable starting point
Run the game with Frame Generation off and observe a repeatable scene, such as a busy street or combat encounter. If performance is unstable, first reduce resolution or demanding graphics settings until the game approaches the developer’s recommended minimum baseline. Frame Generation is intended to build on a reasonably stable native or upscaled result, not rescue severe stutter.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallKeep the test fair: use the same save, location, display refresh setting, power profile, and thermal conditions for each comparison. A handheld that is plugged in, running a higher wattage mode, or freshly cooled can produce a different baseline from the same device on battery after a long session. The 60 FPS figure is a developer recommendation for the underlying game output, not a claim that every handheld can sustain it in every area.
Set up the built-in FSR 3 route
- Launch the PC version of Cyberpunk 2077 and load a save or remain in the main menu.
- Open Settings → Graphics. The names below refer to the PC graphics menu; wording can vary slightly with interface language.
- Find the resolution-scaling controls and select AMD FidelityFX Super Resolution 3. This is the upscaling mode required by the game’s Frame Generation implementation.
- Leave FSR 3 upscaling enabled. The separate frame-generation control depends on it and will not function as an independent switch.
- Turn on FSR Frame Generation. Look for the distinct Frame Generation setting rather than assuming that selecting FSR 3 automatically enables it.
- Apply the changes and return to the game. If the game asks to restart or reload graphics settings, do so before judging the result.
- Play the same test scene used for your baseline. Watch for uneven pacing, doubled or distorted moving objects, and controller response that feels less consistent than with Frame Generation off.
There is no separate paid utility or accessory required by the documented in-game procedure. The exact visual result still depends on the handheld’s graphics processor, power mode, resolution, cooling, and the settings you choose. No particular handheld model, dock, display, or replacement part is established as a requirement.
Rank #2
- WINDEX GAMING WIPES: effortlessly clean all your gaming gear and gaming electronics in one easy step with our new Windex Gaming Wipes
- AMMONIA FREE: our ammonia-free formula is safe to use on all of your favorite gaming equipment like consoles, headsets, controllers, screens, keyboards, and more
- PRE-MOISTENED WIPES: each wipe instantly removes dust, dirt, and stubborn smudges and fingerprints leaving a streak-free shine
- ANTI-STATIC: great for cleaning and wiping down your gaming gear and electronics leaving behind no visible residue
- COMPACT RESEALABLE PACKAGE: store your pack of Windex Gaming Wipes anywhere in your home for whenever a quick and easy wipedown is needed
Build the baseline before enabling generated frames
CD PROJEKT RED’s official wording is: "Minimum FPS: It’s recommended to run the game at a baseline of minimum 60 FPS before enabling Frame Generation for it to work properly." Treat this as a starting requirement for image quality and pacing, not as a measured performance claim for a particular handheld.
If the baseline is too low
- Lower the game’s output resolution or choose a less demanding scaling target.
- Reduce the settings that create the largest GPU load, then retest the same scene.
- Keep the game’s power and thermal behavior consistent while comparing results; changing a handheld’s power profile between tests can make the comparison meaningless.
- Do not use generated frames to disguise severe hitching. The developer warns that artifacts can be more noticeable and frame pacing can suffer when the underlying frame rate is low.
If the baseline is already stable
Enable FSR 3 upscaling first, then the separate Frame Generation control. Compare camera pans, driving, dense crowds, and combat rather than relying only on a static overlay. Generated frames can make motion appear denser, but they do not eliminate the need for a stable game-rendered frame stream.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsRun each comparison long enough to include the demanding parts of your route. A quiet interior can look fine while a crowded market, fast vehicle turn, or combat sequence exposes pacing problems. If the generated result is less consistent than the baseline, turn the feature back off; the higher counter reading is not the goal by itself.
Using AMD AFMF on a Windows handheld
AFMF is not the same feature as Cyberpunk 2077’s FSR Frame Generation. It is an AMD driver-level option managed through Adrenalin. Use it only when the handheld meets AMD’s published requirements.
AFMF requirements
- Eligible Radeon or Ryzen graphics hardware listed as supported by AMD.
- Windows 10 or Windows 11.
- AMD Software: Adrenalin Edition 25.3.1 or later.
- VSync disabled in both AMD Software and the game.
AMD’s support requirements are hardware- and software-specific. If the handheld uses an unsupported graphics configuration, the AFMF control may be absent even though Cyberpunk 2077 itself runs. Installing Adrenalin on a Windows handheld therefore does not, by itself, guarantee that AFMF will appear or operate.
Rank #3
- Ergonomic & Adjustable Design: Fight "text neck" and improve your posture. Designed for comfort, it offers an adjustable height (7.1in-8.5in) (1.4in adjustable range) and angle (5°-85°) Please note: cell phone stand is only 9 inches tall—the length of a standard pencil
- Without blocking subtitles Perfect for office desk Tiktok Face Time Zoom video—this is the ultimate kitchen desk essential for phones! Perfect viewing experience while reducing neck back strain, A must-have for gamers streamers desk, and anyone who values both style and support!
- Sleek & Stable Design fits Otterbox Case: Say goodbye to bent cables, tangles, and tip-overs! LISEN’s stylish adjustable desk phone holder features a built-in charging hole and smart cable management, keeping your phone secure and your workspace clutter-free cool gadgets for men
- ANTI-SLIP DESIGN free hands: The under 10.00 items easy gadgets back and the bottom of this kitchen essentials for women are fully covered by anti-skid silicone, which LISEN stand up desk decor can provide maximum protection device from any scratches and slides
- Your Perfect Viewing Companion:If your product arrives damaged or breaks within 365 days, reach out to LISEN for a quick and hassle-free solution. Struggling with assembly, like tightening the screw? We’ve got your back! Your experience matters to us. (Product including: phone Holder stand*1, screw*1, hexagon screwdriver*1, specification*1)
Configure AFMF globally
- Open AMD Software: Adrenalin Edition.
- Go to Gaming → Graphics for the global graphics profile.
- Locate the AFMF control and enable it if the device qualifies.
- Confirm that VSync is off in the driver profile.
- Open Cyberpunk 2077’s in-game graphics settings and turn VSync off there as well.
- Launch the game and evaluate motion in a repeatable scene.
Configure AFMF for Cyberpunk 2077 only
- Open Adrenalin and select Gaming → Games.
- Select Cyberpunk 2077 from the detected games list, or add its executable if it is not listed.
- Enable AFMF in that game profile.
- Verify the per-game VSync setting is disabled in Adrenalin and in Cyberpunk 2077.
- Save the profile, start the game, and test with the same baseline method used for the in-game route.
AFMF may be useful when the driver and hardware support it, but the official requirements do not establish a universal SteamOS workflow. A Windows configuration should not be presented as proof of compatibility on a Linux-based handheld. Also keep AFMF testing separate from FSR testing: enabling one does not prove that the other is available, and stacking unfamiliar frame-generation paths can make troubleshooting ambiguous.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →When NVIDIA DLSS Frame Generation applies
Use the DLSS route only if the handheld contains a supported GeForce RTX GPU. Cyberpunk 2077’s Patch 2.21 notes, dated January 23, 2025, identify single Frame Generation support for RTX 40 and RTX 50 GPUs and Multi Frame Generation support for the RTX 50 Series.
If the DLSS Frame Generation control is missing, that normally indicates that the GPU is outside those supported generations or that the relevant game and driver configuration is unavailable. Do not substitute DLSS instructions for a handheld with integrated Radeon graphics, and do not assume that an RTX-branded desktop-class GPU is present merely because the game offers DLSS on other PCs. The patch-note scope is the useful check: RTX 40 and RTX 50 cover single Frame Generation, while Multi Frame Generation is identified for RTX 50.
SteamOS and Steam Deck-specific limits
The documented in-game FSR 3 option is the route to check first on a handheld running SteamOS, provided the PC game exposes the setting. The official AFMF requirements name Windows 10 and 11, and the reviewed material does not establish a universal SteamOS installation or compatibility procedure.
That means a SteamOS owner should:
- Update the PC game to a version that includes the FSR 3 feature.
- Look in Settings → Graphics for FSR 3 upscaling and its separate Frame Generation control.
- Test with Frame Generation off first so the game’s native pacing is understood.
- Avoid treating Windows-only AFMF instructions as a supported SteamOS recipe.
If the FSR 3 controls are absent on SteamOS, the available evidence does not justify a universal workaround. Compatibility can depend on the game build, translation layer, driver stack, and handheld firmware, so use device-specific documentation rather than enabling an unrelated Windows driver feature. Do not buy an accessory or paid utility on the assumption that it will add a missing menu option; none is required by the documented in-game setup.
Rank #4
- Easy Installation: Our gaming lights have been designed to enhance your entertainment experience. Simply position the led light bar next to your TV or game console to create a game room environment with ease. They come with USB power and a 60 inch cord for direct mounting and mobility
- Audio Syncing & Extensive Mode: The built-in high-sensitivity music sensor allows you to sync the TV led lights to your favorite music. Lights react and move to the beat of music, film and game audio, creating an incredible immersive sound and light experience – and all without the need for an additional hub. You can choose from 64+ patterns, including strobe, illusion, jump, energy, gradient, running, chasing, fluttering mode etc. Each mode can be applied to different scenes
- 64+ Chasing IC+RGB & W Effect: The independent control design of IC+RGB and white all-in-one multifunctional rgbw led bar lights monitor backlight allows you to easily switch the led lights for desk between IC+RGB and white to enjoy a variety of lighting effects, you can choose white lighting mode with high brightness for better illumination when working, etc. Choose IC+RGB lighting mode when you need to create an entertaining atmosphere for the light show, 16 million colours of Color changing rgb light bar let you dance to the beat and create a dynamic party atmosphere
- Dynamic and Dimmable Lights: 1%-full brightness free brightness adjustment gives you the flexibility to adjust dimmable led light bar for room decorations or a variety of occasions
- USB Powered: USB light bars for room can be powered by powernank, usb charger, TV, Monitor, laptop PC mainframe, making behind TV led lighting bar easy to install in any location.TV led lights are powered by the TV usb interface / PC mainframe, can be turned on/off synchronously with TV / PC
Troubleshoot the most common failures
| Symptom | Likely cause | What to check |
|---|---|---|
| FSR Frame Generation is missing or cannot be enabled | FSR 3 upscaling is not selected, or the game is older than Patch 2.13 | Update the PC game, select AMD FidelityFX Super Resolution 3, apply the setting, and reopen the Graphics menu |
| Frame Generation turns on but motion looks uneven | The underlying frame rate is too low or unstable | Disable generation, lower resolution or demanding settings, establish a steadier baseline, then retest |
| Trails, warping, or other artifacts are obvious | Fast motion and a weak baseline can make generated-frame artifacts more visible | Compare the same scene with generation off and improve the baseline before judging the feature |
| AFMF is not listed in Adrenalin | Unsupported hardware, Windows version, or driver version | Confirm eligible Radeon/Ryzen hardware, Windows 10 or 11, and Adrenalin 25.3.1 or later |
| AFMF appears enabled but does not operate correctly | VSync remains enabled in one of the two profiles | Disable VSync in both Adrenalin and Cyberpunk 2077, then restart the game |
| DLSS Frame Generation is unavailable | The handheld does not use a supported RTX generation | Check whether the GPU is an RTX 40 or RTX 50 model covered by Patch 2.21’s support notes |
| A 60 Hz handheld display feels unimpressive with generation enabled | The developer’s display recommendation is 120 Hz or higher | Check the panel’s actual refresh rate and judge pacing and artifacts rather than relying on an on-screen frame counter |
Driver and Windows checks
CD PROJEKT RED’s FSR 3 support guidance also discusses Hardware-Accelerated GPU Scheduling (HAGS) and graphics-driver versions for AMD, NVIDIA, and Intel systems. Those version references belong to the support article’s configuration guidance and should not be treated as the latest drivers in 2026. On Windows, install the current driver offered by your GPU vendor, then review HAGS in Windows graphics settings if the game’s support guidance calls for it.
Do not mix driver troubleshooting with an assumption that a newer driver automatically adds Frame Generation to every handheld. The game’s FSR 3 switch, AMD’s AFMF requirements, and NVIDIA’s RTX-generation support are separate compatibility checks. If you change a driver, HAGS, VSync, or a power profile, retest from the same baseline instead of comparing results from different configurations.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.A practical decision path
- Using any handheld PC with the PC game? Start in Cyberpunk 2077’s Graphics menu and look for AMD FidelityFX Super Resolution 3.
- FSR 3 is present? Enable FSR 3 upscaling, then enable the separate FSR Frame Generation control.
- The game is unstable? Turn generation off and tune resolution or graphics settings until the baseline is reasonably steady.
- Running Windows with eligible AMD hardware? You may test AFMF in Adrenalin, but keep VSync disabled in both locations and remember that it is a driver feature, not the game’s FSR switch.
- Running supported GeForce RTX hardware? Check the DLSS controls and the RTX generation limits described in Patch 2.21.
- Running SteamOS? Use the in-game route if available; do not claim AFMF compatibility without device-specific evidence.
The practical takeaway
For a handheld PC, the least ambiguous setup is the built-in FSR 3 path: update the PC game, select AMD FidelityFX Super Resolution 3 under Settings → Graphics, and then enable FSR Frame Generation. Treat the recommended baseline and display refresh rate as conditions for better pacing, not as a guarantee. AFMF and DLSS are conditional alternatives governed by separate Windows, driver, and GPU-generation requirements.
Frequently Asked Questions
Why is the FSR Frame Generation option unavailable?
The game requires AMD FidelityFX Super Resolution 3 upscaling to be enabled first. Confirm that setting in Settings → Graphics and update the PC version to Patch 2.13 or newer, which added FSR 3 with Frame Generation.
Recommended Free Tools
Does Frame Generation work well below 60 FPS?
CD PROJEKT RED recommends a baseline of at least 60 FPS before enabling it. Lower or unstable baselines can make artifacts more visible and frame pacing worse, so tune resolution and demanding settings first.
Best Value
- Compatible with Wide Screens - To ensure compatibility with the dual monitor mount, your each monitor must meet three conditions at the same time: First, computer screens size range: 13 to 32 inches. Second, screen weight range: 4.4 to 19.8 lbs. Third, the back of the monitor screen must have VESA mounting holes with a pitch of 75x75mm or 100x100mm.
- Regarding the compatibility with desks - Your desk must meet three conditions at the same time: First, desk material: Only wooden desks are recommended, plastic or glass desks cannot be used. Second, desk thickness range: 0.59" - 3.54". Third, the bottom of the desk should not have any cross beams or panels, as this will interfere with installation. We recommend carefully checking that your desk and monitors meets all above conditions before purchasing.
- Dual C-Clamp Hold - Worried your dual monitors might wobble or slip? Our upgraded base uses a larger platform plus a dual C-clamp structure to lock the dual monitor arm firmly to your desk. Each arm safely keeps your screens steady while you type, click and game—no shaking, no sliding, just a clean and secure setup you can trust every day. It also provides Grommet Mounting installation choice, both options ensure stable and secure fixation for your 0.59" - 3.54" desk.
- Full-Motion Adjustment For Comfortable View - Pull the screen closer when you’re deep in a spreadsheet, push it back to watch videos, or rotate to portrait for coding — moving everything smoothly with just one hand. The monitor stand offers +85°/-50° tilt, ±90° swivel and 360° rotation. Raise your monitor up to 15.75″ to support a healthy sitting posture. Whether you’re working from home, gaming through the night, or switching between video calls and documents, getting the screens to your natural line of sight helps relieve neck, shoulder and back strain so you can stay focused longer with less fatigue.
- Keep Your Desk Organized: By lifting both screens off the desktop, this dual monitor stand opens up valuable space for your keyboard, notebook, docking station or a simple, clutter-free work area. Built-in cable management guides wires along the arms, keeping cords out of sight and out of the way. Enjoy a tidy, modern workstation that looks as good as it feels to use.
Can I use AMD AFMF on SteamOS?
AMD’s published AFMF requirements specify Windows 10 or Windows 11. The documented materials do not provide a universal SteamOS procedure, so do not assume the Windows Adrenalin steps are supported on SteamOS.
Do I need a 120 Hz handheld display?
The developer advises a display refresh rate of 120 Hz or higher, but many handhelds use 60 Hz panels. The recommendation is guidance for the display environment, not a guarantee that every handheld can meet it or that a higher frame counter will look smooth.
Is a paid utility, dock, or accessory required?
No. The documented in-game FSR 3 setup requires only the PC game and compatible hardware and software. AFMF and DLSS have their own hardware and operating-system requirements, but no particular accessory is established as necessary.
Free tools Windows power users keep installed
One-click scans. No signup required.
Which NVIDIA handheld GPUs support the game’s Frame Generation?
Patch 2.21 identifies single Frame Generation support for GeForce RTX 40 and RTX 50 GPUs. Multi Frame Generation is identified for the RTX 50 Series. Handhelds without those supported GeForce generations should not use the DLSS instructions.
The Bottom Line
Update Cyberpunk 2077, select AMD FidelityFX Super Resolution 3 in Settings → Graphics, and enable the separate FSR Frame Generation switch. Aim for a stable 60 FPS baseline and, where possible, a 120 Hz display. Treat AMD AFMF and NVIDIA DLSS as separate, hardware- and OS-dependent options.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
