Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesYou can use OBS Studio to send a Tamil devotional playlist to YouTube Live, but a true 24/7 broadcast depends on your computer, power, internet connection, OBS, and media source staying available. First verify that your channel can go live, clear the streaming rights for every recording and visual, create a YouTube stream, then configure and test OBS. YouTube automatically archives streams under 12 hours; it does not promise one replay for a continuous 24-hour broadcast.
Before you set up OBS
Check YouTube live-stream eligibility
Your channel must be verified and must not have a live-streaming restriction in the previous 90 days. YouTube states that streamers must be at least 16. First-time live-stream activation can take up to 24 hours, so check YouTube Studio’s Live Control Room well before the intended start. See YouTube’s live-streaming eligibility guidance and encoder setup steps.
Confirm rights for the recordings and visuals
Use only music and artwork you have permission to broadcast. A devotional subject, traditional melody, publicly accessible upload, or a recording already available on YouTube does not by itself make that specific recording free to rebroadcast. Confirm that your permission covers livestreaming, the relevant territories, and any replay or archive you intend to keep.
YouTube scans live streams for third-party content. A matched broadcast may be replaced, interrupted, or terminated. Even if you have a license, the rights owner may need to add your channel to its Content ID allowlist for the stream to proceed without a match-related interruption. Keep written evidence of your rights and ask the owner about allowlisting when applicable. Read YouTube’s guidance on copyright issues with live streams.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Create the YouTube Live stream
-
In YouTube Studio, select Create → Go Live. Create a new stream or schedule one, and fill in its title, description, visibility, and other event details.
-
Open the stream in Live Control Room. If you are not connecting OBS through its YouTube service integration, copy the stream URL and stream key into OBS when prompted. Treat the key like a password: anyone who obtains it may be able to broadcast to your event. Do not post it in a video, public chat, or screenshot.
-
Check the Live Control Room before the planned start. If live streaming has not yet been enabled on the channel, activation may take up to 24 hours.
Rank #2
Anker USB-C Hub, 5-in-1 USB Hub for Laptops, 4K HDMI Multiport Adapter- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
YouTube’s encoder setup guide explains the event and connection workflow. Its live encoder settings guidance recommends RTMPS, a secure extension to RTMP.
Free tools Windows power users keep installed
One-click scans. No signup required.
Build a playlist scene in OBS
Add a visual and audio source
Create one scene for the broadcast. Add a background image or designed visual, then optionally add text such as a Tamil title, artist, or devotional identifier. Add the media or audio source that will play your recordings. OBS lets you arrange image, text, and media sources in a scene; consult the OBS Studio Overview Guide for the basic scene and source concepts.
Watch the OBS audio mixer while playing a test recording. The relevant audio meter should move, and the source must be routed to the stream rather than only to local monitoring. Check for clipping, silence, and unintended desktop audio. Use a representative section of the playlist, including quiet and loud passages, to set a usable level.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Make looping behavior explicit and test it
There is no single universal OBS playlist recipe established for every media source and configuration. The precise repeat or playlist controls depend on the source and setup you choose. Test the end of one track, the transition to the next, and what happens when the final item ends. If your chosen source does not reliably advance and repeat, change the media source or use a playlist method you have tested rather than assuming the scene will loop on its own.
Set OBS output for a stable stream
Choose resolution and frame rate for the connection
For a mostly static devotional visual, 30 frames per second is a sensible starting point; 60 fps is not needed just because the encoder can produce it. Choose a resolution your upload connection can sustain. A stable 720p30 stream can be preferable to a 1080p stream that repeatedly drops frames or disconnects.
Recommended Free Tools
Use YouTube’s encoder recommendations
- Protocol: use RTMPS where available.
- Rate control: set CBR.
- Keyframes: set a 2-second interval; YouTube says not to exceed 4 seconds.
- Audio: use AAC or MP3.
- 1080p30 H.264 bitrate: YouTube’s current encoder guidance lists 5 Mbps as the minimum and 14 Mbps as recommended. These are ingestion figures, not a guarantee of the quality each viewer will receive.
Use the codec-specific figures in YouTube’s current encoder settings guidance for other resolutions and codecs. Run an upload-speed test under conditions similar to the broadcast, and leave headroom rather than setting the stream at the full measured upload rate. The connection has to sustain the stream continuously, not just briefly reach the target.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Test, start, and monitor the broadcast
-
Before making the event public, start OBS and confirm that YouTube receives the encoder feed in Live Control Room and reports healthy stream status.
-
Check a representative visual and audio passage in the preview. Confirm that text is readable, the image is not cropped, and the audio is present at a consistent level.
-
View the stream from another device or browser to check the actual viewer experience, not only the OBS preview.
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.Best Value
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
-
During operation, watch both YouTube stream health and the computer’s audio and media playback. OBS includes an automatic reconnect option, but test its behavior in your own setup before relying on it.
A 24/7 stream relies on the computer, power, network, OBS process, media source, and YouTube connection all remaining available. Arrange human checks for stream health and, if you are recording locally, recording status and available storage. No setup can be assumed uninterrupted without testing over the conditions in which you plan to run it.
Plan the replay and local recording separately
YouTube says streams under 12 hours are automatically archived. Its guidance does not promise a single automatic replay for a continuous broadcast longer than 12 hours. If an automatic replay matters, consider shorter sessions. If you need your own copy, use OBS recording options and check that your computer has enough storage and can sustain long recordings; test the intended duration and file workflow rather than assuming a 24-hour file will be saved successfully. See YouTube’s encoder setup page and the OBS guide.
Common problems and fixes
| Symptom | What to check | Practical fix |
|---|---|---|
| YouTube does not receive the stream | Channel live eligibility, activation status, selected YouTube event, stream URL, and stream key. | Confirm eligibility in Live Control Room, allow up to 24 hours for first-time activation, and reconnect OBS to the correct event with the current key. Keep the key private. |
| OBS is live, but there is no sound | Audio meter activity, source routing, and whether the selected media source is playing. | Play a test passage, route the source to the stream, and check the meter before going live. |
| The playlist stops or does not repeat | What the selected source does at track end and after the last playlist item. | Test the complete transition and end-of-list behavior. Choose and verify a playlist method that explicitly advances and repeats in your configuration. |
| Stream health degrades or OBS disconnects | Upload capacity, bitrate, network stability, and whether the computer remains awake and OBS stays running. | Test the connection, lower resolution or bitrate to a sustainable level using YouTube’s codec-specific guidance, and test OBS automatic reconnect before depending on it. |
| YouTube interrupts the broadcast | Copyright matches on music or visuals and whether the rights owner has allowlisted the channel. | Use content you are cleared to stream, contact the rights owner about Content ID allowlisting for licensed material, and resolve the match before restarting. |
| No single replay appears for the full broadcast | Whether the stream ran longer than YouTube’s under-12-hour automatic archive threshold. | Use shorter sessions if an automatic replay is important, or test a separate local recording plan. |
Or let it run in the cloud
For a YouTube-only continuous playlist, StreamNeo is an alternative to keeping OBS and your computer running at home: upload your video or build a playlist, add your YouTube stream key once, and go live. StreamNeo loops uploaded videos from the cloud; it does not broadcast a camera feed.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →- Nothing has to stay on at home; the stream runs in the cloud.
- Uploaded video streams as made, up to 4K 60fps, at one price per slot with no quality tiers.
- Automatic recovery if YouTube drops the stream.
- The first day is free with no card, one free day per account.
The monthly option is $9.99 per month. Every slot includes one always-on stream, 10 GB storage per slot pooled across active slots, looping and playlists, and support from the StreamNeo team. See StreamNeo for details, then start your free first day.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
