Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
The best fit for a LEGO console build is an enclosed acrylic case made for its exact set number, with enough room for every displayed piece—not just the main console. For LEGO NES 71374, iDisplayit is the feature-based choice for access to the TV controls, while Wicked Brick suits a staged layout with supports for the controller. Both brands offer Atari 10306 and Game Boy 72046 cases with different display and access features. These cases are marketed as dust-protective, but no independent dust-ingress or UV-transmission test results were established for the options below.
At a glance
| Name | Best for | Key spec | Checked |
|---|---|---|---|
| iDisplayit case for LEGO NES 71374 | Frequent access to the TV controls | Side access door; internal size approximately 52 L × 26 W × 39 H cm | Nov 2026 |
| Wicked Brick case for LEGO NES 71374 | A staged NES display with dedicated controller support | Shaped two-tier base; external size 54.2 W × 34.2 D × 40.7 H cm | Nov 2026 |
| Wicked Brick case for LEGO Atari 10306 | Displaying the console, joystick, cartridges and game scenes together | External size 52 W × 36 D × 28 H cm; raised shelf for three scenes | Nov 2026 |
| iDisplayit case for LEGO Atari 10306 | Presenting the three game scenes on an included plinth | Page specifies an 81 × 48-stud base area; listed as sold out at review | Nov 2026 |
| Wicked Brick case for LEGO Game Boy 72046 | Showing alternate Game Paks and lenticular screens | Listed as 25 W × 13 D × approximately 18.3 H cm; confirm height on current drawing | Nov 2026 |
| iDisplayit case for LEGO Game Boy 72046 | A simpler lift-off case, with optional printed background | Internal size 21 L × 10 W × 18 H cm | Nov 2026 |
The table distinguishes internal dimensions from external ones because they answer different questions: internal space affects whether the build fits, while external size determines the shelf footprint. The manufacturer product pages reviewed on Oct. 30, 2026, did not establish prices or independent protection ratings; check current listings for stock, price and product drawings before ordering.
As an Amazon Associate I earn from qualifying purchases.
Allow for the base, stands and any intentional spacing when measuring. A case that technically contains the model can still be unsuitable if the controller, joystick, cartridges or scene builds have to be stacked awkwardly. Also check the direction of doors and covers against the location of your shelf. A side door is useful only if that side remains reachable after the case is installed.
How should I choose a case for a LEGO console build?
Start with the set number and the complete display layout. The NES, Atari and Game Boy builds each have parts or alternate pieces that can be missed if you shop by the main model’s dimensions alone.
Popular on Amazon
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Inventory every displayed piece. Include controllers, cartridges, stands, scene builds and any alternate pieces you want on view.
- Match the case to the set number. A case made for another LEGO model—or even for a similarly sized console—may not accommodate the same components or arrangement.
- Check usable interior space and shelf footprint separately. One manufacturer may publish internal dimensions while another lists external dimensions. Do not compare those values as if they were equivalent.
- Choose access to suit the display. A side door, lift-off cover or magnetic front changes how you reach the model, but it does not establish that the case is airtight.
- Confirm current details before purchasing. Availability, options and product drawings can change; an Atari option was listed as sold out at the time of review.
Before checkout, sketch the intended arrangement from above and from the side. Mark the tallest element, the deepest protrusion and the space needed to remove a cover or open a door. Compare those marks with the manufacturer’s usable dimensions, not simply the outside of the box. If a page gives only external measurements, ask the seller for an interior drawing rather than assuming the panel thickness is the only difference.
Decide whether you want a permanent presentation or occasional access. A lift-off cover is practical for assembly and maintenance, while a side or magnetic opening can let you reach a control or accessory without dismantling the display. Those mechanisms are convenience features; they are not evidence of a seal, lock or carrying strength.
The comparisons below are feature-based fits, not a measured ranking of build quality or dust performance. The manufacturers provide product descriptions and dimensions, but no independent dust-ingress or UV-transmission tests were established.
What size display case fits LEGO NES 71374 and its TV?
Both compared cases are made for NES set 71374, but the LEGO display has more than a TV to fit. The television, console, controller and Game Pak need a deliberate layout; sizing a case only around the TV risks leaving the other pieces without a place.
The LEGO Group lists the TV itself at over 22.5 cm high, 23.5 cm wide and 16 cm deep. That is a measurement for the TV model, not the full display or either case. Leave room for the other pieces and account for the case’s internal dimensions, where provided.
Measure with the TV handle and rotary controls in the position you intend to display them. If the controller sits on a support or the Game Pak is placed beside the console, include those projections in the depth and width calculation. A nominal fit around the television can fail once the other three display elements are added.
Recommended Free Tools
iDisplayit: a feature-based fit for access to the TV controls
The iDisplayit NES case has a side access door intended to let the owner reach the TV’s rotary controls without removing the case. Its 3 mm acrylic panels arrive flat-packed. The manufacturer lists approximate internal dimensions of 52 L × 26 W × 39 H cm and external dimensions of 54 L × 28 W × 40 H cm.
Use the internal figures to assess whether the complete chosen layout fits; use the external figures to see how much shelf space the case will occupy. These are manufacturer-stated dimensions, and the page describes them as approximate. The available information does not establish that the door seals tightly or keeps out all dust.
This option makes the most sense when you expect to demonstrate or adjust the television controls after installation. Confirm that the door opens toward a clear part of the shelf and that your chosen arrangement does not block the control area. The side opening does not mean the console can be operated as an electronic device; it is access to the LEGO rotary controls.
Wicked Brick: a feature-based fit for a staged NES display
Wicked Brick’s NES case has a shaped, two-tier base, supports for the controller and a lift-off acrylic cover. The manufacturer specifies 3 mm panels and external dimensions of 54.2 W × 34.2 D × 40.7 H cm. The build is not included.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsAlso popular on Amazon
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
The controller supports and shaped base are useful if you want the display to organize the separate pieces rather than simply enclose them. The listed dimensions are external, however, so they do not give the usable interior clearance. Confirm the current product drawing and your intended arrangement before buying.
A two-tier presentation can separate the television from the controller and Game Pak visually, but it also adds fixed geometry to the case. Check where the console sits relative to the raised section and whether your preferred viewing angle is clear from the front. Treat the supports as part of the display system, not as proof that every possible arrangement will fit.
Can I turn the NES TV handle without removing the case?
iDisplayit documents a side access door for reaching the TV rotary controls. Wicked Brick describes a lift-off cover rather than a dedicated side door, so the supplied product information does not establish equivalent access while the cover stays in place.
If control access is a deciding factor, place the iDisplayit door on the accessible side of the shelf and verify the current opening design. If the display is primarily decorative, the Wicked Brick cover and controller supports may be the more convenient feature-based fit. Neither description establishes that the controls are functional electronics or that the case can be transported while loaded.
Free tools Windows power users keep installed
One-click scans. No signup required.
Will an Atari 2600 case fit the joystick and game scenes?
Choose by LEGO set number 10306 and account for the full display: the console, joystick, cartridges and three game-scene builds. The LEGO console itself is over 8 × 33 × 22 cm; that is not the size of the complete arrangement.
The scene builds are easy to overlook when comparing cases. Count all three before choosing a shelf location, and decide whether they should sit beside the console, on a raised level or on a separate plinth. A case sized to the long console body alone may leave no usable surface for the joystick or cartridges.
Wicked Brick: cutouts and a raised scene shelf
Wicked Brick describes a case with cutouts for the console, joystick and cartridge holder, plus a raised shelf for the three game scenes. Its cover is removable, and its listed external size is 52 W × 36 D × 28 H cm.
This layout is the clearer feature-based fit if you want the scenes elevated within the display. Because the published size is external, it cannot by itself confirm interior clearance for a particular arrangement. Check the current drawing and decide where each extra piece will sit before ordering.
Check the height of the shelf against the tallest scene and confirm that the removable cover can be lifted vertically in your available space. The cutouts describe intended placement, not a guarantee that every custom rearrangement will work. Keep the console, joystick and cartridge holder in the positions shown unless the seller confirms another layout.
iDisplayit: a plinth for the three scenes
iDisplayit’s Atari 10306 page specifies an 81 × 48-stud base area and an included plinth for the three game scenes. It describes the case as flat-packed 3 mm acrylic. The page was listed as sold out at review, so availability needs to be rechecked before treating it as a purchase option.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
The stud-area specification describes the base area, not a full internal measurement in centimeters. It should not be directly compared with Wicked Brick’s external dimensions. Check the current product page for stock, measurements and the arrangement the base is intended to support.
If the plinth is the reason you prefer this case, verify that it is included in the current version and not an optional upgrade. Recheck whether the console, joystick and cartridges share that base area or require a particular orientation. Stock status and included options can change independently of the set’s dimensions.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Is there a display case for LEGO Game Boy 72046?
Yes. Wicked Brick and iDisplayit both list cases for LEGO Game Boy set 72046. The LEGO model measures over 14 cm high × 9 cm wide × 3 cm deep, but that is the handheld model—not its stand, the full display arrangement or the case.
The LEGO Group’s 2025 announcement lists 421 pieces and states that there are no light, sound or display play functions. Those facts describe the model itself; they do not indicate that a case includes lighting or electronics.
Think about the stand and the interchangeable Game Paks and lenticular screens as well as the Game Boy itself. A case can fit the main model while providing too little room or no suitable presentation for the loose alternatives.
Wicked Brick: magnetic front access and stands for extras
Wicked Brick describes a magnetic front-access case with stands for Game Paks and lenticular screens. Its listing gives dimensions of 25 W × 13 D × approximately 18.3 H cm. The height unit on the product page is truncated, so confirm the current product drawing instead of relying on that height for a clearance decision.
The accessory stands are the clearest documented reason to choose this layout if you want alternate pieces displayed alongside the model. Check whether your preferred arrangement uses the stands and whether the case accommodates the LEGO stand.
Magnetic front access can be convenient when the case sits close to a wall, because it does not require lifting the entire cover upward. Confirm the magnet arrangement and opening clearance on the current product page, and leave enough space in front to remove or reposition the alternate pieces without touching the main model.
iDisplayit: lift-off access and an optional background
iDisplayit describes a lift-off case made from flat-packed 3 mm acrylic and offers an optional printed background. Its stated internal dimensions are 21 L × 10 W × 18 H cm; external dimensions are 23 L × 12 W × 19 H cm.
The internal measurements are the relevant figures for fitting the model and chosen arrangement, while the external measurements help with shelf planning. Check how you intend to store or display the alternate screens and Game Paks, since the page’s listed dimensions alone do not say how those loose pieces will be arranged.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Also popular on Amazon
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Widely Compatible: Transform any USB-C port into a USB-A port and USB-A port into a USB-C port, and connect up a wide range of USB-C(including MacBook, iPad Pro/Air/Mini, iPhone models with USB C ports, Samsung Galaxy series, and Google Pixel series. ) and USB A devices(including external hard drives, phones, mice, printers, and more)
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
The printed background is a presentation option, not a measurement or protection rating. Decide whether it improves the view from your normal seating position and verify that it does not obscure the stand or accessories. Because the case lifts off, plan a stable place to set the cover during maintenance.
Does a LEGO display case keep dust out?
An enclosed case can reduce exposure to settling dust compared with leaving a build on an open shelf, and these manufacturers market their cases as dust-protective. That is not the same as proof that a case is airtight or keeps every particle out.
Wicked Brick also uses UV-protection language for its cases. The product information reviewed did not provide an independently verified dust-ingress rating or a quantified UV-block percentage for the options in this guide. Do not treat a vendor’s protection language as a measured performance figure or as a guarantee against fading.
Panel thickness, a lift-off cover, a side door and magnetic access describe construction and convenience. They do not supply a certified seal. Dust can also enter whenever a cover or door is opened, so choose an opening style you can use without brushing the model or scattering loose accessories.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
A case also does not remove the need to clean the display occasionally. No official LEGO cleaning method specific to these assembled console builds was established here, so avoid assuming a temperature, solvent, spray or washing procedure is LEGO-approved. Follow applicable instructions from LEGO or the case manufacturer if available, and avoid letting cleaning products or moisture reach the model.
Keep the enclosure on a stable shelf away from traffic that could shake loose pieces. When opening it, support the cover or door fully and keep small Game Paks, cartridges and scene elements in a defined location. These handling habits limit accidental disturbance, but they are not a quantified dust-reduction guarantee.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Can I carry the LEGO build inside its case?
Do not assume a display case is a transport container. iDisplayit explicitly warns that its NES case is not designed to be relocated with the LEGO inside; its Game Boy case page also says to remove the LEGO before relocating the case.
For either of those cases, move the build separately and handle the case as a display enclosure. The available product information does not establish that the other cases are safe to transport while loaded, either. A removable or lift-off cover is an access feature, not evidence that the assembled display can travel securely.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchIf a shelf must be moved, remove the LEGO model and loose accessories first, then move the empty enclosure. Reassemble the display only after the case is level and positioned. This is especially important for layouts with raised shelves, plinths or accessory stands, where a shift could change the intended arrangement even if no panel breaks.
What should I verify on the product page?
- Confirm the exact LEGO set number: 71374, 10306 or 72046.
- Read whether the listed dimensions are internal, external, approximate or a stud-area measurement.
- Check that the current package includes the base, supports, plinth, background or accessory stands shown in the description.
- Measure shelf width, depth and overhead clearance, including the space needed to lift a cover or open a door.
- Review stock, options and the current product drawing; the iDisplayit Atari page was sold out at review.
- Read handling notes and assume the LEGO should be removed before relocation unless the manufacturer explicitly says otherwise.
These checks prevent the most common fit errors: buying for the console body while forgetting its accessories, confusing external and internal figures, and placing an access door against a wall. They also keep a display feature from being mistaken for a dust or transport certification.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
How were these case options selected?
The options were selected because the manufacturers document cases for the exact LEGO console set numbers in scope—NES 71374, Atari 10306 and Game Boy 72046—and provide features or dimensions relevant to the display. The feature-based distinctions are control access and controller support for NES, scene presentation for Atari, and access or accessory display for Game Boy. No hands-on comparison, independent dust test, UV test or performance ranking is claimed.
Frequently Asked Questions
Does LEGO Game Boy 72046 have working screen or sound functions?
No. In its 2025 announcement, The LEGO Group stated: “There are no light, sound or display play functions.” That describes the LEGO model, not whether a display case has lighting.
Recommended Free Tools
How many pieces are in LEGO Game Boy 72046?
The LEGO Group’s 2025 announcement lists the set at 421 pieces. That count is for the LEGO set, not for a case or display accessories.
What is the LEGO NES TV size?
The LEGO Group lists the TV alone at over 22.5 cm high, 23.5 cm wide and 16 cm deep. The console, controller and Game Pak require additional space inside the case.
Which NES case allows access to the TV controls?
iDisplayit documents a side access door for the TV’s rotary controls. Wicked Brick documents a lift-off cover and controller supports, but not an equivalent side-door arrangement.
Are the Atari 10306 case dimensions directly comparable?
No. Wicked Brick lists external dimensions of 52 W × 36 D × 28 H cm, while iDisplayit specifies an 81 × 48-stud base area. Confirm the current drawing and intended layout rather than comparing those figures as equivalent.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Does a case guarantee protection from dust or UV fading?
No guarantee or independent rating was established. The manufacturers market dust protection, and Wicked Brick uses UV-protection language, but no quantified dust-ingress or UV-transmission results were provided.
Can I move an iDisplayit case with the LEGO inside?
No. iDisplayit warns that its NES case is not designed to be relocated with the LEGO inside, and its Game Boy page similarly instructs owners to remove the LEGO before relocating the case.
Is LEGO PAC-MAN Arcade 10323 a console display build?
LEGO identifies 10323 as an arcade cabinet, so it is outside a guide focused on console builds. Its shape and display needs should not be assumed to match the NES, Atari or Game Boy cases here.
The Bottom Line
For NES 71374, choose iDisplayit when reaching the TV controls matters, or Wicked Brick when a shaped, supported presentation is the priority. For Atari 10306, compare the raised scene shelf with the plinth layout and recheck iDisplayit’s stock. For Game Boy 72046, compare magnetic or lift-off access and how alternate Game Paks and screens are displayed. In every case, match the exact set, verify current internal clearance and options, and treat dust and UV language as manufacturer claims rather than independently measured protection.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
