Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
These steps apply to the AUTUMN Direct hydraulic powder Brick Press, not every soil-block, pollen, or industrial press. Check that your unit has the same chamber, plates, wing nuts, and hydraulic bottle jack before following them; the supplied jack may vary. Read the complete manual for your specific jack before use.
Before you start
- Set the press on a hard, level surface, away from the edge. Keep children away and keep hands and other body parts clear of moving parts.
- Read the jack maker’s full manual, including its warnings and maintenance directions. AUTUMN says the supplied third-party bottle jack is designed as a lifting device and should be used only as configured with the Brick Press. Do not exceed its rated capacity or use it for another purpose.
- Stop and consult the jack manual if you are unsure how to operate it. AUTUMN warns that ignoring manufacturer instructions and safety warnings may result in serious injury or death.
See AUTUMN Direct’s Brick Press instructions and safety page and the Brick Press product page.
How to use the press
- Prepare the press. Set the jack aside and confirm its release valve is closed. Remove the wing nuts and both plates.
- Lubricate if desired. AUTUMN describes lubrication as optional; if you use it, wipe a suitable lubricant over the inside of the chamber and both plates.
- Position the bottom plate and jack. Put the bottom plate inside the chamber with its hole facing down. Position the jack underneath and align its piston with the hole.
- Load the material. AUTUMN says to fill the chamber at least halfway for corn starch powder or a material of choice. For air-pocketed material such as crushed recycled plastic, it says to fill the chamber to the top. These are the maker’s general loading directions, not validated recipes for every material.
- Secure the top plate. Place the upper plate with its inscription facing up, then secure it with the wing nuts.
- Pump the jack. Assemble the handle and pump until you cannot apply additional pressure. Do not keep pumping beyond that point; AUTUMN warns that over-pumping can damage the press.
- Let the material set. The product instructions do not specify a set time.
- Release pressure and open the chamber. Stand the press upright and slowly turn the jack release valve. Remove the wing nuts. AUTUMN specifies using a flathead screwdriver with a 3/16- to 1/4-inch tip in the socket under the upper plate to lift it, then remove the plate.
- Eject the brick. Secure the chamber without the upper plate using the wing nuts. Close the jack release valve and pump until the bottom plate reaches the chamber edge. Remove the brick, then slowly release the valve.
- Clean the press. Wipe ordinary residue with a damp cloth; AUTUMN also suggests rubbing alcohol for a more thorough cleaning. Follow the jack maker’s separate maintenance instructions.
What materials can you press?
AUTUMN lists corn starch chunks and bricks, tea, sawdust, paper, and crushed recycled plastic as examples or uses. Its page also mentions mannitol or baby powder chunks. It does not publish material-specific recipes, validated pressure values, moisture specifications, set times, or safety directions for processing each material. Do not assume that the same loading or pressing method is suitable for all of them.
Which Brick Press size should you choose?
AUTUMN lists two configurations. The capacity and dimensions below are manufacturer specifications; brick dimensions are approximate.
Recommended: Fix Windows Errors and Clear Junk Files in Minutes - Free Scan →Recommended: Update Every Outdated Driver on Your PC in One Scan - Free →
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
DEXSO 12 Ton H-Frame Hydraulic Shop Press, Orange
- Robust and Reliable: The H-frame structure provides exceptional strength and stability, allowing it to support substantial loads and ensuring consistent performance during operation.
- Efficient Hydraulic Mechanism: Featuring a 12-ton hydraulic jack and dual manganese steel springs, this press delivers consistent pressure with rapid oil return, reducing the effort needed for pressing tasks. It also comes with two detachable plates for securing small components.
- User-Friendly Operation: This 12-ton press includes three adjustable holes on each side for height modifications. With high-quality precision springs and a smoothly polished piston punch, it guarantees safe and effortless operation by simply pressing or lifting the long handle.
- Multi-Purpose Functionality: Ideal for both professional users and DIY enthusiasts, this hydraulic shop press is perfect for tasks such as disassembling automotive parts, metalworking, bending, straightening, and punching efficiently.
- Safety Design: Designed with a built-in safety valve, this hydraulic press ensures safe heavy lifting. The safety valve activates automatically when the pressure exceeds 6 tons, preventing any potential overpressure damage to the workbench.
| Capacity | Press dimensions | Approximate brick size |
|---|---|---|
| 4 tons (8,000 lb) | 6 × 4 × 12 inches | 5 × 3 inches; up to 2 inches thick |
| 8 tons (16,000 lb) | 9 × 7 × 16 inches | 7 × 5 inches; up to 3 inches thick |
Choose based on the press footprint and the maximum brick dimensions you need, as well as the listed capacity. These figures describe the press; they are not recommended operating pressure settings for a particular material.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Sources and availability
For the equipment-specific procedure and safety directions, consult AUTUMN Direct’s instructions. The maker’s size and capacity details are on its product page. When accessed on October 8, 2026, the product page showed the press as sold out at a displayed price of $379.99; storefront availability and price can change. The page also stated a one-year warranty, but did not provide its coverage terms.
Quick Recap
Bestseller No. 1
Bestseller No. 4
Bestseller No. 5
Best Value
6 Ton H-Frame Hydraulic Shop Press, 13000 LBS Capacity
- 6-Ton Performance for Pros & DIYers:Effortlessly tackle automotive and metalworking tasks with 6-ton (13,000LBS) pressure. Remove/install bushings, bearings, ball joints, and gears, or bend, straighten, and stamp metal with precision. Designed for both seasoned mechanics and hobbyists, this press delivers reliable force for garage and workshop projects.
- Customize Height & Secure Small Parts:Adapt to any task with 4 adjustable height and a quick pin system. Two movable stamping plates let you secure small components during use, ensuring efficiency and accuracy for diverse projects.
- Built-In Relief Valve for Overload Protection:Prevent workbench damage with automatic pressure control. The integrated relief valve activates when pressure exceeds 6 tons, ensuring safe operation during heavy lifting. Ideal for industrial environments where precision and protection are non-negotiable.
- H-Frame Design & Durable Carbon Steel Build:Eliminate wobbling with a sturdy H-shaped frame and 0.1" thick carbon steel body. The powder-coated finish resists corrosion and simplifies cleaning, making this press a long-lasting addition to your toolkit.
- Precision-Fit for Diverse Projects:Securely handle small components with ease by the dual movable stamping plates and 2.2"-9.8" adjustable height range.Whether you’re pressing bearings into tight spaces or stamping intricate metal parts, this press adapts to your workflow.
Rank #4
Big RED 20 Ton H-Frame Hydraulic Garage Floor Press - Heavy-Duty Steel Construction with Stamping Plates, 40,000 lb Capacity, Red
- Adjustable Worktable for Versatile Use – Manually raise and lower the table surface to customize your working distance, matching the requirements of different projects. Powered by a 20-ton jack with an expansive working range of 0" to 28" for handling various workpiece sizes.
- Safe & Controlled Pressing Operation – Equipped with high-quality precision springs that enable slow, safe rebound after pressing, preventing sudden drops and ensuring operator safety. The polished, treated piston-ram resists skiving and wear for long-lasting performance.
- Durable Powder-Coated Finish – Coated with lead-free, powder-painted finish that delivers exceptional resistance to oil, grease, and dirt. The tough coating is easy to clean and maintains a smooth, rust-free surface even in harsh workshop environments.
- Ideal for Professional & DIY Enthusiasts – Perfect for auto repair shops, metalworking studios, and home garages. Combines heavy-duty construction with user-friendly design to tackle a wide range of pressing tasks efficiently and reliably.
- Heavy-Duty 20 Ton (40,000 Lb) H-Frame Press – Built with premium steel for professional garage/shop tasks including straightening, bending, pressing, and stamping.
Rank #3
Garvee 20 Ton Hydraulic h-Frame Press with Adjustable Worktable & Press
- 【High Power Hydraulic System for Heavy-Duty Tasks】Our 6–20 Ton H-Frame shop hydraulic press is engineered for heavy-duty automotive repair and metal fabrication work. Equipped with an industrial-grade hydraulic system for stable power output, it effortlessly handles bearing removal, U-joint installation, workpiece straightening and stamping. Perfect for professional mechanics, repair shop technicians and DIY enthusiasts.
- 【Height Adjustable Worktable with Movable Press Plates】The worktable height is freely adjustable from 1.6 inches to 27.8 inches, paired with two repositionable press plates to flexibly arrange your working space. It securely clamps workpieces of various sizes to deliver precise pressing, bending and assembly operations, featuring an ergonomic design for labor-saving and high-efficiency operation.
- 【Built-in Safety Pressure Relief Valve for Overload Protection】Designed with an integrated automatic pressure relief valve that activates once the load exceeds 6 tons to effectively avoid overpressure hazards. This safety feature protects operators during heavy-duty applications like bushing and gear pressing, meanwhile greatly extending the service life of the hydraulic press.
- 【Sturdy Reinforced Carbon Steel H-Frame Construction】Constructed from 0.2-inch thick high-strength carbon steel with a reinforced H-shaped base, this shop press stays stable without shaking during operation. The surface adopts anti-corrosion red powder coating, enabling it to withstand harsh working conditions in various workshops.
- 【Wide Application for Automotive & Metal Processing】This versatile hydraulic press works great for pressing truck bearings, straightening motorcycle frames and more. Widely applied in auto repair shops, metal processing factories and home garages, it is ideal for the press fitting of gears, pulleys, ball joints and other components.
Rank #2
Dragway Tools 6-Ton Benchtop Hydraulic A-Frame Shop Press with Press Plates
- Install and remove pressure-fitted parts and bend or straighten metal with ease
- Strong A-Frame Design
- Stroke: 5 in. (130 mm)
- Minimum Operating Distance: 2 in. (50 mm)
- Maximum Operating Distance: 4 in (110 mm)
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
