iscsiwmiv2.dll is a genuine Microsoft Windows component: the WMI Provider for iSCSI. When iscsiwmiv2.dll is missing, cannot be loaded, or is reported as corrupt, repair Windows rather than downloading a replacement file.
Start with this diagnostic checklist
Before changing anything, note:
- Which program displays the error: Windows itself, an administration tool, an iSCSI utility, or an unrelated application.
- When it appears: during startup, after Windows Update, while opening iSCSI settings, or when using Storage or PowerShell commands.
- Your Windows architecture: go to Settings > System > About and check System type.
- Whether the file exists: check
C:WindowsSystem32iscsiwmiv2.dllon 64-bit Windows. - Whether antivirus quarantined it: open your security software’s protection or quarantine history.
The file belongs to Windows storage-management infrastructure. Microsoft documents its related WMI classes in the RootMicrosoftWindowsStorage namespace and associates them with Iscsiwmiv2.mof.Microsoft iSCSI WMI documentation
As an Amazon Associate I earn from qualifying purchases.
What the iscsiwmiv2.dll error means
Windows may show wording such as:
iscsiwmiv2.dll is missingiscsiwmiv2.dll was not foundiscsiwmiv2.dll could not be loadediscsiwmiv2.dll cannot be locatediscsiwmiv2.dll is either not designed to run on Windows or it contains an error
These messages describe different stages of the same general problem:
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →- Missing or not found: Windows cannot locate the expected file.
- Could not be loaded: the file may exist, but Windows cannot load it because it is damaged, blocked, incompatible, or missing a required component.
- Not designed to run on Windows: the file may be from the wrong architecture or Windows build, or its contents may be corrupt.
- An application reports the error: that program may be calling Windows storage or WMI functions. It does not necessarily own the DLL or need a separate copy.
iscsiwmiv2.dll is not a Visual C++ runtime, DirectX file, or ordinary application dependency. Installing those packages is not an appropriate first fix.
#1 Best Overall
Fix 1: Install Windows updates and restart
A failed or incomplete update can leave protected system files and the Windows component store inconsistent.
- Press Windows + I.
- Select Windows Update.
- Select Check for updates.
- Install all available updates.
- Restart when Windows asks.
- Try the operation that produced the
iscsiwmiv2.dllerror again.
If Windows Update itself fails, continue with DISM and SFC below. Do not copy a DLL into System32 to work around an update failure.
Fix 2: Repair Windows with DISM and SFC
This is the primary repair for a missing or damaged Windows copy. DISM repairs the component store that Windows uses as a source, and SFC checks protected system files against that repaired store.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minute- Open Start.
- Type
Command Prompt. - Right-click Command Prompt and choose Run as administrator.
- Select Yes at the User Account Control prompt.
- Run this command:
DISM.exe /Online /Cleanup-image /Restorehealth
- Wait for DISM to finish. Keep the window open even if progress appears to pause.
- After DISM completes, run:
sfc /scannow
- Wait until verification reaches 100 percent.
- Restart Windows.
Microsoft documents this DISM-then-SFC sequence for repairing Windows system files.Microsoft System File Checker instructions
If SFC reports that it found and repaired corrupt files, restart and test the affected operation. If it reports that no integrity violations were found, the problem may be WMI registration, antivirus interference, or an incompatible copy rather than a missing file.
If DISM says that source files could not be found, use a matching Windows installation source. Microsoft documents /Source and /LimitAccess for repairs where Windows Update cannot provide the required files.Microsoft Windows image repair guidance
When manually repeating DISM and SFC becomes guesswork, Outbyte PC Repair can scan for system problems and show what needs attention; its repair functions require the full version, and it is not a substitute for reinstalling a program that specifically owns an application file.
Fix 3: Check the correct Windows location and architecture
On 64-bit Windows, the normal location is:
C:WindowsSystem32iscsiwmiv2.dll
Despite its name, System32 is where 64-bit system components normally reside. A 32-bit Windows installation uses its corresponding 32-bit system location. Microsoft update documentation lists architecture-specific x86 and x64 copies of this component.Microsoft file and architecture information
To inspect the file:
- Press Windows + E.
- Enter
%windir%System32in the address bar. - Search for
iscsiwmiv2.dll. - If it exists, right-click it and choose Properties.
- Check the Digital Signatures tab, if present, and inspect the Details tab for its file information.
Do not replace a 64-bit Windows copy with a file taken from SysWOW64, another computer, an older Windows release, or Windows Server. Do not rely on one universal file size or version: Windows builds use different component revisions.
If the file exists but Windows says it is not designed to run on Windows, run DISM and SFC instead of replacing it manually. A present file can still be damaged or mismatched.
Fix 4: Check antivirus quarantine
Security software can quarantine a system file or prevent it from loading. Treat a detection seriously, but do not immediately disable protection.
- Open Windows Security from the Start menu.
- Select Virus & threat protection.
- Choose Protection history.
- Look for an action involving
iscsiwmiv2.dll. - Review the detection name, file path, and action taken.
- If the file is identified as malware or the detection remains active, leave it quarantined and run a Full scan.
- If the file is confirmed as a genuine Microsoft system copy, update Windows and your security software before considering restoration.
If restoration is allowed, restore only the copy from the expected Windows directory. Then run DISM and SFC and restart. If antivirus immediately quarantines it again, do not keep forcing restoration. Repair Windows from a trusted source and investigate the security product’s detection.
Fix 5: Repair the WMI provider when iSCSI commands fail
A missing DLL is not the only possible problem. The file may exist while the WMI provider registration or related classes are damaged.
Use this path when:
- iSCSI management commands fail.
- Storage PowerShell commands return WMI or provider errors.
- The iSCSI configuration interface cannot retrieve storage information.
- SFC reports no corruption, but the provider still fails.
First, open an elevated Command Prompt:
- Open Start.
- Type
Command Prompt. - Right-click it and select Run as administrator.
- Run these commands one at a time:
mofcomp iscsirem.mof
mofcomp iscsidsc.mof
mofcomp iscsihba.mof
mofcomp iscsiprf.mof
mofcomp iscsiwmiv2.mof
mofcomp storagewmi.mof
- Restart the WMI and iSCSI services, or restart Windows.
- Test the iSCSI or Storage command again.
Microsoft specifically recommends recompiling these MOF files for iSCSI storage-connectivity and WMI-provider problems.Microsoft iSCSI storage troubleshooting
Do not use mofcomp as the first response to an ordinary “DLL missing” dialog. Repair the Windows files first.
Free tools Windows power users keep installed
One-click scans. No signup required.
Fix 6: Check the iSCSI service and related devices
The DLL belongs to iSCSI and Windows storage management, but a connection failure can also involve services, networking, storage drivers, firmware, certificates, or target configuration.
To check the iSCSI service:
- Press Windows + R.
- Type
services.mscand press Enter. - Find Microsoft iSCSI Initiator Service.
- Open it and check its status.
- Start it if it is stopped, provided you use iSCSI storage.
- Set its startup behavior according to your storage configuration.
To inspect drivers:
- Right-click Start and choose Device Manager.
- Expand Storage controllers, Disk drives, and Network adapters.
- Look for warning icons.
- Right-click the affected device and choose Properties.
- Review the General and Driver tabs.
- Use Update driver only with a driver supplied by Windows Update or the hardware manufacturer.
- Restart Windows and test again.
Driver work is relevant when iSCSI connectivity or storage devices fail, but it does not replace DISM and SFC for a damaged Windows DLL.
When manually hunting through storage, network, and chipset driver versions is slowing the diagnosis, Outbyte Driver Updater can scan and identify stale drivers; the driver installation feature requires the full version, and the hardware manufacturer remains the preferred source for a definitive driver.
Do not use regsvr32 for this file
regsvr32 is not a general DLL repair command. It works only with DLLs that provide a supported registration entry point such as DllRegisterServer.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Running commands such as these is therefore not the normal fix:
regsvr32 iscsiwmiv2.dll
regsvr32 /u iscsiwmiv2.dll
They may produce a message that the entry point is missing, or they may change nothing. WMI provider registration uses its MOF files and Windows management infrastructure. Use the Microsoft mofcomp procedure only when iSCSI or WMI symptoms justify it.
Avoid standalone DLL download sites
Do not download iscsiwmiv2.dll from a random DLL repository or copy it from another PC. That approach can introduce:
- Malware or a tampered file.
- The wrong x86 or x64 architecture.
- A file from an incompatible Windows build.
- Incorrect permissions or servicing metadata.
- A replacement that hides deeper component-store corruption.
The safe sources are Windows Update, DISM using Windows Update or matching installation media, SFC, and a Microsoft installation or repair process. If an unrelated application claims it includes this Windows provider, repair that application only through its official installer, but do not let it replace the Windows copy in System32.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallIf SFC cannot repair iscsiwmiv2.dll
If SFC reports that it found corrupt files but could not repair some of them:
- Restart Windows.
- Run DISM again.
- Run
sfc /scannowagain. - Review the CBS log for the affected component.
- Retry DISM with matching Windows installation media if Windows Update cannot supply the source.
- Check Windows Update history for failed servicing operations.
Microsoft provides additional guidance for Windows Update corruption and component-store installation failures.Microsoft Windows Update repair guidance
If repair still fails, use System Restore where an appropriate restore point exists, or perform an in-place repair installation using matching Windows media. Back up important data first. A clean installation should be a last resort after checking hardware health and completing a malware scan.
Best Value
FAQ
Can I delete iscsiwmiv2.dll?
No. It is a Windows iSCSI WMI component. If you do not use iSCSI, leave the file alone rather than deleting it, because other Windows management functions may still depend on the provider.
Recommended Free Tools
Should I copy it into System32 or SysWOW64?
No. Use DISM and SFC so Windows restores the correct architecture, build, permissions, and servicing state.
Is iscsiwmiv2.dll a virus?
The filename belongs to a legitimate Microsoft Windows component, but malware can use any filename. Check its path, digital signature, antivirus history, and scan results. A copy in an unusual application or temporary folder deserves investigation.
Does the error mean my hard drive or iSCSI target is failing?
Not necessarily. The error may indicate Windows file corruption or WMI registration damage. If iSCSI connectivity also fails, separately check services, networking, target settings, storage drivers, and firmware.
Why does a normal desktop application mention this file?
The application may be calling Windows storage or WMI APIs, or Windows may be damaged. Repair Windows first, then use the application’s official repair or reinstall option if the error remains.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
