Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Valor Mortis graphics settings are easiest to tune by starting at Medium, using your monitor’s target resolution, selecting Quality upscaling, and keeping frame generation off until the ordinary frame rate feels responsive. If performance is still below your target, switch to Balanced upscaling, then reduce shadows or effects one at a time. Turn motion blur off for a sharper moving image, but keep anti-aliasing enabled to prevent shimmering.
These recommendations are a hardware-aware starting point, not a guaranteed FPS preset. The available settings references describe an Alpha/demo build, and menu names or options can change. The benchmark figures below come from one RTX 2060 test system, so use them to understand trade-offs rather than predict your own result.
As an Amazon Associate I earn from qualifying purchases.
Recommended Valor Mortis settings at a glance
Use this profile as your first pass, then adjust one setting at a time. The unofficial Valor Mortis settings reference and its performance guide cover the demo/Alpha options on which this profile is based.
| Setting | Start with | Why |
|---|---|---|
| Preset | Medium | A practical balance; use Low near minimum hardware. |
| Output resolution | Your monitor’s intended resolution | Avoids diagnosing desktop or windowed-mode scaling as game blur. |
| Upscaler | DLSS, FSR, XeSS or TSR at Quality | Preserves more fine detail than more aggressive modes. |
| Anti-aliasing | Enabled | Disabling it can produce visible shimmer. |
| Motion blur | Off if you prefer a crisp moving image | Sharpens perception; no FPS gain is established. |
| Shadows | Medium or the preset default | One of the first quality reductions to try when GPU-limited. |
| Effects | Preset default | Lower it if heavy combat causes drops. |
| Ray tracing | Off while establishing a baseline | Leaves more performance headroom for core rendering. |
| Frame generation | Off initially | Lets you judge real game-rendered FPS and latency first. |
| Frame cap | A rate your PC sustains | A stable cap is more useful than a fluctuating peak. |
How do I choose a starting preset for my PC?
Start at Medium for most systems, but choose Low if your hardware is close to the published minimum target. Hone reports a publisher target of 30 FPS at 1080p on Low with upscaling for minimum specifications, and 60 FPS at 1440p on Medium with upscaling for recommended specifications. Those are targets relayed by Hone, not independent guarantees or proof that every system will render at native resolution.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Before changing quality options, set the resolution you actually intend to play at. If you use borderless or windowed fullscreen, some builds may follow the desktop resolution; verify the output resolution in the game and operating system before blaming the upscaler for a soft picture. A 1080p desktop stretched to a 1440p display can look blurry even when the game’s internal settings are correct.
Which upscaler and mode should I use?
The demo settings menu lists DLSS, FSR, XeSS and TSR, although availability depends on your GPU, drivers and the current build. Begin with whichever supported option is available at Quality. Quality renders more of the scene internally than Balanced or performance-oriented modes, so it usually protects small details such as distant geometry, weapon edges and foliage better.
If Quality cannot hold your frame-rate target, compare Balanced before dropping the entire preset. Balanced reduces the internal render resolution and can soften fine detail, but the performance gain may be worthwhile during combat. There is no controlled Valor Mortis comparison in the supplied evidence that establishes a universal winner among DLSS, FSR, XeSS and TSR. Keep the same route, resolution, driver and other settings when comparing them on your own PC.
When an image looks soft, first confirm the output resolution and upscaler mode. Moving from Balanced back to Quality often restores detail more effectively than changing unrelated texture or lighting options. Do not assume a sharper screenshot means lower latency; evaluate clarity and responsiveness separately.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Should anti-aliasing stay enabled?
Yes. Keep an anti-aliasing method enabled unless you have a specific reason not to. The settings references warn that disabling anti-aliasing can cause visible shimmering, especially on thin geometry and moving edges. If the image is too soft, adjust the upscaler mode or resolution rather than turning anti-aliasing off.
Does turning motion blur off increase FPS?
Motion blur can be turned off when you want a crisper view of moving enemies, but the reviewed sources do not establish an FPS improvement from this toggle. Treat it as a visibility preference, not a performance fix. If frame rate is low, change upscaling, shadows or effects instead.
Which settings should I lower when FPS is still too low?
Change one variable at a time so you can see the visual cost and the actual gain. After Quality upscaling, shadows are a sensible first reduction because they are described as a major GPU cost. Effects are another candidate, particularly if drops occur during heavy combat where particles and lighting effects accumulate.
- Try Balanced upscaling. Keep the preset and resolution fixed, then check whether the frame-rate target is met without unacceptable softness.
- Lower shadows. Reduce only the shadow setting and repeat the same short route.
- Lower effects. If combat scenes remain slow, reduce effects and compare the result in a busy encounter.
- Reconsider the preset. If these changes are insufficient, step from Medium to Low rather than disabling anti-aliasing.
Ray tracing should remain off while you establish a baseline unless your system has substantial headroom. The menu can expose separate ray-tracing, lighting or reflection controls, so one switch should not be assumed to disable every ray-tracing path.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
What does frame generation change?
Frame generation can increase the displayed frame counter without creating an equivalent number of new game renders. It therefore should not be used to disguise a weak base frame rate. Establish a stable, responsive result with generation off, then test generation as a separate mode.
The in-game tooltip cited by the performance guide warns against enabling generation below a 40 FPS base because latency and visual artifacts can become more noticeable. Compare the conventional base rate and the generated output separately, and judge controls by responsiveness rather than the larger counter alone. Set a frame cap the PC can sustain instead of chasing brief peaks.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallWhat FPS can an RTX 2060 expect?
A detailed October 2026 test by AllThingsHow used an Intel Core i7-9700K, an RTX 2060 with 6 GB of VRAM, 24 GB of RAM, driver 617.42, 1920×1080 output and a 144 FPS cap. The tester ran one warm-up lap on a 30-second route. These numbers describe that system and route only.
| Profile on the test system | Average FPS | 1% low |
|---|---|---|
| Low + DLSS Ultra Performance | 66.1 | 42.2 |
| High + DLSS Ultra Performance | 55.4 | 29.9 |
| Epic + DLSS Ultra Performance | 37.8 | 24.3 |
| High + DLSS Quality | 37.7 | Not reported |
| High + native 1080p TAA | 26.2 | Not reported |
| High + FSR Ultra Performance + frame generation | 51.5 | Not reported |
The table illustrates how strongly preset, upscaler and generation interact. It does not prove that DLSS is always faster or clearer than FSR, nor does it predict performance on another CPU, GPU, driver or game area. The test also reported 5.4–5.7 GB of VRAM use from the card’s 6 GB; High and Epic triggered a VRAM warning on that particular card.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
How do I tune Valor Mortis without introducing blur?
Use a repeatable loop rather than changing several options at once. Consistency matters more than a single peak number.
- Choose your target. Decide whether you are optimizing for a stable 60 FPS, a higher refresh-rate target or the best image quality your hardware can sustain.
- Fix the resolution. Select the monitor output you intend to use and confirm that borderless mode has not changed it.
- Pick the starting preset. Use Medium generally, or Low if you are near minimum hardware.
- Set Quality upscaling. Keep frame generation off and anti-aliasing on.
- Warm up the same route. Play the same short section long enough for initial loading and shader activity to settle. Shader compilation and area streaming can contribute to early stutter, so do not judge the first seconds alone.
- Record average FPS and 1% lows. Keep the route, driver, resolution and cap unchanged between runs.
- Change one setting. Try Balanced upscaling, then shadows, then effects. Re-run the same route after each change.
- Restore clarity if needed. If Balanced is too soft, return to Quality before sacrificing unrelated detail settings. Turn blur off only for preference.
- Test frame generation last. Enable it only after the non-generated result feels responsive and stays above the game’s suggested base-rate floor.
This process lets you identify whether the limitation is primarily rendering resolution, shadows, effects or memory pressure. It also prevents a generated FPS number from hiding a poor underlying frame time.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
What should I do if Valor Mortis shows a VRAM warning?
Back out of the current profile and lower the preset or other memory-heavy options. The warning reported in the RTX 2060 test says the selected settings may cause frame drops, stutter or instability. Treat it as a reason to reduce settings, not as a universal memory threshold for every GPU.
Textures and resolution-related allocations can behave differently across hardware and builds, so watch for the warning after loading a demanding area rather than only in the menu. If lowering settings removes the warning but stutter persists, let shader compilation finish and check again after the area has fully streamed. Those are troubleshooting checks, not a definitive diagnosis of every hitch.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Does Valor Mortis have DLSS or FSR?
The demo settings guide lists both DLSS and FSR, along with XeSS and TSR. Which options appear and how well they work depends on your graphics card, driver and the current game build. Select a supported option at Quality first, then compare Balanced only when necessary.
What is the best final profile for competitive readability?
For a clear, responsive starting point, use your intended output resolution, Medium (or Low near minimum hardware), a supported Quality upscaler, anti-aliasing enabled, motion blur off if preferred, ray tracing off and frame generation off. Cap the game at a rate your PC can sustain. If that profile misses the target, use Balanced upscaling, then lower shadows and effects individually.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Jonathan Houle of Hone summarizes the same order of operations: “Start with Medium, leave frame generation off while tuning, and try Quality upscaling if your PC can maintain the performance you want.” It is editorial guidance, not a benchmark result.
Frequently Asked Questions
Can I use native 1080p instead of an upscaler in Valor Mortis?
Yes, if your hardware sustains the desired frame rate at native resolution. The RTX 2060 test averaged 26.2 FPS at High with native 1080p TAA, but that result belongs only to the stated test system and route; other PCs may differ substantially.
Why does Valor Mortis stutter after I change graphics settings?
Shader compilation and area streaming are possible causes, especially immediately after loading a new area or changing options. Let the initial compilation and streaming settle, then repeat the same route before making another adjustment.
Is a higher 1% low more important than average FPS?
For combat feel, 1% lows help reveal short drops that an average can hide. Compare both numbers under identical route, resolution, driver and settings conditions, and prefer the profile whose lows remain acceptable during the scenes you actually play.
Free tools Windows power users keep installed
One-click scans. No signup required.
Why does my borderless Valor Mortis image look blurry?
Borderless or windowed fullscreen may follow the desktop resolution in some builds. Verify the game’s output resolution first, then check whether the upscaler is set to Balanced or a more aggressive mode before changing other quality options.
